Icosahedral Lamp (D20) G4 Bulbs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Icosahedral / D20 Lamp, Easy Print, Threaded
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Wanted to design an Ambient lighting lamp, mainly as a completly waterproof design to be dumped into a hanging plants basket.
This is an easy print, both halves of the lamp print without supports, and i never had thread fitting issues. i include a thread fit check anyway, for anybody that wants to make sure. Varying the infill and its density gives wide variety to the optics of the lamp, i used transparent petg and gyroid infill between 15 and 30%.
The lightbulb holder is a slightly more complicated print, but i've made a version that is pretty easy to print by placing it on its side.
I used ceramic G4 Bulb Holders, and mains Voltage Bulbs, but would recommend use of 12V Bulbs and external Power Bricks for people not skilled in working with mains power.
If you want to use it as i originally intended, i recommend going with 2 Walls, and sealing with clear silicone.