1 / 5
remix Yarn storage bobbin drillbit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A plastic drillbit for a yarn storage bobbin tends to break after repeated uses. This replaces it with a metal shaft.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 3
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
The model sits flat on the build plate and supports are not needed.
3D printer: Sovol sv6 plus
filament: 3dfuel proPCTG
You will need to check your printer for fit of the shaft and the end fitting into the post. Glue in the shaft with 2 part epoxy glue and let cure. You may need to sand the end to fit into the post. The end will break easily until the shaft is glued in, the shaft will re-enforce the end.