1 / 6
Custom Scrabble! — image 1
1 / 6

Custom Scrabble!

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Small scrabble kit, within the a shell inspired by a laptop!

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
8
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Public Domain

DISCLAIMER: YOU WILL HAVE TO CREATE MORE PIECES (with all the letters on) FOR THIS PROJECT! (A blank template piece has been provided!)

Introduction:

This model is a small scrabble kit, which includes pieces, a carrying case (inspired by a laptop shell) and the required racks (which your pieces are placed on...). However, this version has a twist, there are two letters on each piece, one which will get you points and another which will not, but can be used to create words to increase game play. Additionally, the "screen" area of the casing can be used as the board, however there are no defined areas upon which the pieces must be placed, so the players will play until the board is so full that no more words could be created with pieces remaining. 

Technical Specifications:

Each piece is 12 by 21.5 (mm), with a depth of 2.5 mm, the 'key' holes in the casing have been designed to fit these pieces exactly. When placed/stacked in the 'key' holes, a maximum of four can be fit, without causing issues where the lid won't close!

The whole lower case itself is 120 by 200 by 20 (mm), with the upper being 120 by 200 by 10 (mm). Bringing the total dimensions to 120 by 200 by 30 (mm)!!!

Assembly Instructions:

  1. After creating more pieces (As per the exemplar piece, using the blank template), place the printed copies of the pieces into the shell, with a maximum of four per 'key' hole

  2. Once all the 'keys' have been placed, slide the upper half of the casing onto its hinges

  3. Then, take the drawer assembly for the racks, slide it into the lower casing and store your racks within there.

Warning: Some adjustment may be required for the drawer in order to ensure a fit which will not rub excessively on the sides of the inner casing. 

  1. Optional: Add a two spring by way of gluing to the bottom of the 'key' hole for the space bar, then attach the space bar to the springs, creating a fidget/gimmick within the case!

Tags