Anycubic ACE Pro Roller for 195mm Spools (Professional Lab, Smart Print)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rear roller for the Anycubic ACE Pro so 195 mm spools sit on the rollers and no longer rub on the bottom of the ACE.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 2
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Replacement rear roller for the Anycubic ACE Pro. With it, 195 mm OD spools (Professional Lab, Smart Print) sit properly on the rollers and no longer rub on the bottom of the ACE.
Install: pop out the rear roller of the ACE Pro and snap this one into its place. No tools needed.
Size: roller body 17 mm, flanges 20 mm, 75 mm long, 3.5 mm bore for the original 3 mm shaft.
Print: 2 parts (body + cap), PETG recommended. Body standing on its flange, cap flat, no supports. 0.16 mm layers, 4 walls, 25% gyroid, 5 mm outer brim. Glue the cap into the body. A Kobra S1 3MF is included.
Printed in PETG and tested in my ACE Pro. Designed with AI assistance.