Wall Mount for Helicarrier 76354 Brick Set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sturdy 30° wall bracket for 76354 Helicarrier brick set. No glue or mods needed; includes a fit test piece.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall Mount for Helicarrier 76354 Brick Set
A 3D-printed wall bracket that lets you hang the 76354 Helicarrier brick model on the wall at a 30° tilt, so you can see both the side profile and the detailed top deck. The set rests securely on the flat studded patch on its underside—nothing is glued, and the original build is not modified in any way. Two small alignment pegs fit into the recesses on the underside, while a low front lip holds the model safely in place.
Print settings (recommended)
Material: PETG (or other strong, non-brittle filament)
Layer height: 0.2 mm
Walls: 4 or more
Infill: 40% or more
Supports: Check the slicer preview (minimal supports may be needed depending on overhang settings)
Orientation: The part is already rotated onto its side for optimal layer strength—print it as oriented.
Dimensions: Approx. 170 × 270 × 120 mm. If your print bed is smaller, split the model in your slicer.
Fit check: Print the small peg test piece first to verify the fit in the underside recesses before printing the full bracket.
Please note
Mount the bracket using heavy-duty screws and wall anchors suited to your specific wall type (drywall, brick, concrete). You display your set at your own risk; I am not responsible for any damage resulting from improper installation or print failure.
Disclaimer: This is an unofficial, fan-made accessory designed for compatibility with the 76354 building block set. It is not affiliated with, sponsored, or endorsed by any toy or entertainment brand.