1 / 2
Temperature tower with bridging test | PLA GCode included
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
Temperature Tower to find the correct temperature for your filament
Print instruction
- Material: PLA
- Print resolution: 0,20
- Bed 60°C
- First 10mm prints with 190°C then every 5mm the temperature increases by 5°C
!warning!
Watch the first few layers as the extruder may clog due to low temperature. if it gets clogged, create your own GCode with a higher temperature