The WhistleBlower - Prusa i3 X Carriage for E3D Chimera with built-in layer fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Also see Front mount for BLTouch: https://www.thingiverse.com/thing:2070920 What is this? The WhistleBlower is a…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 38
- Makes
- 0
- Views
- 525
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Also see
Front mount for BLTouch: https://www.thingiverse.com/thing:2070920
What is this?
The WhistleBlower is a compact , small and light x-carriage for Prusa i3 with an integrated mount for E3D Chimera or Cyclops dual head
Disclaimer
This is a work in progress. I'm currently printing and trying the last prototypes.
Be aware that no print has been made with this head/mount combo yet
Also, the nozzles end up significantly higher on the Z axis (approx 15mm), you may need to lower you Z axis endstop.
Fan support
This carriage includes an integrated mount for a radial fan at the back, used as a layer fan through the inbuilt air duct.
Unlike many other mounts, it uses a radial fan ("blower" type) instead of the classic 40mm fan, allowing much better cooling though significantly increased air pressure
No more dangling fans on the sides of the carriage, or stacked fans on top of the radiator, your printer's head remains clean and compact.
This designs also lets the radiator's front and top clear, allowing you to easily mount additional equipement (eg: bed sensors)
Head mounting
The radiators is mounted from the back for increased stability, and easy access to the bowden tubes pre-tensionners
Multiple mount block of varying thickness are included to fit your specific needs, all equipped with eyelets for strain relief and guidance of the head's cables
Extras
The carriage also sports a drag-chain slot (for prusa i3 variants like BQ Hephestos)
A "No drag-chain" version is also available.
The carriage also includes a customizable x-axis endstop "finger" to suit your printer"s specific positionning of the switch
Print Settings
Printer:
BQ Hephestos Prusa i3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40
Notes:
Should print well without supports, on it's side.
Add "supports touching buidplate" if needed, but do not print supports inside the air-duct
Support walls are included in the files for those few spots where they are necessary
A version without support walls is also available, so that if you have an advanced slicer, you can add your own.
Post-Printing
Cut and clean supports on the back of the carriage
Sources
This design ideas hatched from the two designs credited in "remixed from" section.
Thanks to the authors for their inspiration.
Category: 3D Printer Parts