1 / 2
68mm Grommet for IKEA Rällen Qi Charger
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Did you ever wonder why IKEA's Rällen doesn't fit in a standard hole of 68mm or 73mm. (i.e.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 532
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Did you ever wonder why IKEA's Rällen doesn't fit in a standard hole of 68mm or 73mm.
(i.e. IKEA Rallen, 2 11/16 inch, 2 7/8 inc for our imperial friends B-)
Here's a grommet for a 68mm hole where Rällen perfectly fits in.
Print instructions
Category: Replacement Parts Print Settings
Rafts: No
Supports: No
Resolution: 0.15
Infill: 20% Honeycomb
Filament: 3D FREUNDE PLA grey
Notes:
Depending on the settings in the SCAD file, you will need supports or you can print without.
The attached STL file is printable without supports.
Post-Printing
Just glue it in...
...or leave it ;-)