1 / 2
68mm Grommet for IKEA Rällen Qi Charger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Did you ever wonder why IKEA's Rällen doesn't fit in a standard hole of 68mm or 73mm. (i.e.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 532
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Did you ever wonder why IKEA's Rällen doesn't fit in a standard hole of 68mm or 73mm.
(i.e. IKEA Rallen, 2 11/16 inch, 2 7/8 inc for our imperial friends B-)
Here's a grommet for a 68mm hole where Rällen perfectly fits in.
Print instructions
Category: Replacement Parts Print Settings
Rafts: No
Supports: No
Resolution: 0.15
Infill: 20% Honeycomb
Filament: 3D FREUNDE PLA grey
Notes:
Depending on the settings in the SCAD file, you will need supports or you can print without.
The attached STL file is printable without supports.
Post-Printing
Just glue it in...
...or leave it ;-)