1 / 1
Hole Gauge for Hole calibration
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Test print to determine the printed hole size after printing and cooldown of the part
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 63
- Makes
- 2
- Views
- 533
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Print this part if you want to determine how big the actual holes in your prints will be after cooldown/shirinking of your part. Afterwards you can 3D model the richt hole size.
Every part starts at .0 and enlarges the hole by .1 till .9 per part.
So if you print the 5.x gauge and the 6th hole on the gauge ist actually 5.0 mm, that means you have to model every hole at 5.5 mm to achieve the right diameter.
This is only needed for small holes, since the shrinking of small features differs from the shrinking of large features.