1 / 3
Holder for Schrader tire inflator
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple holder for a Schrader (standard car tire valve) inflator that has a length of 1/4" pipe. Won't work if you have…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple holder for a Schrader (standard car tire valve) inflator that has a length of 1/4" pipe. Won't work if you have the quick disconnect directly attached to the inflator head.
Print Settings
Printer:
Prusa MK3S
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Filament:
eSun PLA
white
Notes:
Doesn't need supports, but you might want to add a brim if you have first layer adhesion issues as the part in contact with the print bed is on the smaller side.
Category: Tool Holders & Boxes