Pegboard mount for safety glasses
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keep safety glasses (or smaller normal glasses) handy on conventional round pegboard.
- Rating
- 4.556 / 5
- Likes
- 62
- Downloads
- 429
- Makes
- 9
- Views
- 1,320
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I got new safety glasses and needed to keep them somewhere safe. I use pegboard, so that was the perfect place. I looked at a bunch of the options available here (see below for a list) but none of them were quite what I wanted - most hold the glasses by the bridge, which might not work so well with these as they have rubber nose pads. So I created my own. The holder is quite long as these safety glasses wrap around quite a bit and wind up being pretty deep.
This is designed for 1" pegboard with 1/4" holes.
Print instructions
Prints with no supports. You can do supports for the upper pegs but if you don't it'll just be a little messy on the underside of the top pegs, which shouldn't cause too much trouble. If it interferes with the holes, it's an easy cleanup.