1 / 8
The Clicker - Piezoelectric Shocker
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Just in time to shock some of your friends on April Fool's!
Uses a regular piezo lighter ignition module, M3 bolts and nuts to close the case, and at the contact points at the top.
Edit 3/28:Added a version with a captive trigger. The tolerances I used held it perfectly by friction, but it might be different for others.
Print Settings
Supports: Yes
Resolution: 0.2
Infill: 24%
Notes:
Printed front and back facing down to get a better mating surface, and this required supports. The trigger prints horizontally with no supports.