Counting matching models…
One thing is for sure; cash is always acceptable as a gift and probably won't be “re-gifted”! We have always had fun calling cash gifts “Generic Gift Cards”, so I made up this little box to share the fun. I also included a "Universal Gift…
Print with 4 walls 25% 3D Honeycomb, Gyroid infill etc etc.. 3 top and bottom shell. Similar, if not the same, build instructions as the MK6. Take a part 1 POM wheel then put the two bearings in the slots in the motor plate, then the…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
Before pushing the display into the housing, please make sure that the flat cable is centered over the cut-out. It is best to familiarize yourself with the installation instructions before installation (found in the files). All smthng…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
This is a pivotable and adjustable top-front 4.3" screen mount for the Gaggiuino mod on a Gaggia Classic and Gaggia Classic Pro. This mount uses the Loogle “official” Gaggiuino screen housing…
I printed this in TPU. Probably could use some wall optimizing in the slicer to reduce retractions and eliminate a lot of the stringing with TPU.
I made this luggage tag for our vacation. To protect the paper from moisture, I simply laminated it without the paper, cut it to the right size, and placed it over the address as protection.
This case fits the Gaggimate pro board. It allows the board to be attached to the rear of the case.
I created a mount that allowed me to use a spare Tubus luggage carrier I had lying around on my Surly Cross Check frame. The standard mounts couldn't properly bridge the angle and distance. Openings in the mount were included for…
The button on the handle of the “ Swiss Gear La Sarinne Hardside Spinner International Carry-On 20-Inch ” is prone to breaking, making the user unable to retract or extend the luggage handle. This button is probably used in other bags of…
The original water tank cover was not suiting my needs after I started storing my blind shaker on my grinder, I had printed up the puck screen holder and had it sitting up there but thought I may be able to make everything more solid.…
I modified the original housing to better suit my needs. This is for the original 2.1" Lilygo screen. I printed both parts in PETG just as they are saved in the STLs, for the back I used a 5mm brim with 0mm gap and manually added…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 Support my work: https://ko-fi.com/modsmthng Latest update (12 June 2026): Reduced the screw hole diameters, increased the wall thickness…
Base housing of the smthng display housing 3 (with frame and back clip) for GaggiMate . This version has no brackets and is therefore perfect for remixing or attaching to flat surfaces. To do this, add holes for screws in the slicer, for…
☕ Gaggia Classic Drip Tray for Bookoo Themis Ultra Scale This is a custom drip tray for the Gaggia Classic , designed to fit the Bookoo Themis Ultra scale perfectly 🎯 🧩 Two versions included: Standard version – compact and clean, ideal if…
There are other solutions to silence your pump such as this . However this holder is way easier to mount and way cheaper and faster to build. This simple vent-mounted holder keeps your pump suspended without it touching any part of the…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 This is a remix of the version for the LilyGo 1.75 Amoled real pictures. The basic housing fits very well (Var0 and 1). The individual…
I designed a replacement suitcase wheel for my IT luggage and am sharing the model for others who may encounter a similar issue. During a recent flight, one wheel on my IT suitcase was lost. Due to the double-wheel configuration, the…
A set of printed corner radius gages to help with reverse engineering shapes. 1-24mm Radius
Deutsch: Der Klassiker, Rad wurde am Rücklicht hochgehoben und das Rücklicht ist abgebrochen, ein Originalersatzteil ist nicht zu bekommen über Trelock. Also nachkonstruiert. Gedruckt. Gedruckt in: PETG Schwarz, "aus Vollmaterial" also…
This model is a remix of the Low-Noise Ulka Pump Mount for the Gaggia Classic Pro. The main difference between the Classic and the Classic Pro versions of this model is how the pump is originally mounted. I tried using a simple adapter…
I printed this in PLA with flat faces down. No supports required. Printed on Prusa Core One with default "0.1mm Fast Detail" profile.
This is a remix of the original Gaggiuino Gen 3 screen housing by Loogle. All credit for the base model goes to the original creator. I made this version because the original housing sits very close to the water area on the Gaggia…
Files to print wing structures which are very similar to the original Estes Pegasus #0806 model rocket. The single wing is sized to the original. The scaled and mirrored wings are for direct attachment to a BT-5 body tube without an…
⚠ This print is for an application that involves mains voltage. Make sure there are no exposed wires and take the necessary precautions! Be aware that there is a risk of electrocution or fire. ⚠ This is an enclosure for mounting the…
EN: Replacement foot for a suitcase from Action. The original plastic part broke, so I designed and printed a stronger one. Tested in real use – the suitcase is fully functional again. used filaments: Abaflex PETG-CF and TPU 95 Prusament,…
Similar with the straight holder mount but with inverted end.
i was having an issue with my hands and gripping the knob and i didnt want what everyone else has
Electronics box for Gaggimate mod on the Delonghi ECP 4x M3x6-8mm optional for lid. 2x M3x6-8mm needed for the board. 2x M4x6mm for SSR
steam knob for gaggia classic, i used hungarian 5forint and cut in half and hammered in, you can use any metal with 1,5mm thikness
Printed with translucent PETG as that was what i had besides PLA. printed with support for the overhang. After printing and cleaning the print. I used aviation snips to cut a penny in half and wedged it in the two parallel cutouts.
I needed a way to keep my printer enclosure door firmly pressed against the foam padding around the opening to prevent fumes from printing (especially ABS) from escaping. This can be mounted with double sided tape, or 3M Command Strips,…
I wanted something to organize my growing collection of espresso necessities. This one piece solution is compact and holds 2 brushes, WDT tool, and a Gaggia portafilter. I added a few rubber bumper feet to the bottom of the stand to keep…
i working on it but i think ist alredy can be used. I also aded the fusion file you can customise it.
Its For the first modell primo, Uses 2 metal 2mm thiknes and hammered in. Print with asa or abs or maybe petg. Use 90%infill.
Ever struggled to find your suitcase on airport arrival because there's so much luggage and all looks the same? This might be the solution for you! A quick and easy print, very strong and almost undestroyable! Easy to attach to and remove…
This is a replacement part for the rear luggage cover (parcel shelf) support bracket on the Renault Megane Grand Tour (MK2). The original plastic clips are known to become brittle and break over time; this 3D-printed version offers a…
Printer: Prusa MK3S+ Filament: Elegoo PLA+ Infill: 15% Time: 3H10M
Enclosure for WS2812 8 LED light bar. Has holes for magnets (8mm D) and cover snaps in. I designed this for Gaggia Classic machines but can be used for anything. I am using an ESP32 C3 to drive it with WLED but ESPHome can also control…
This is a depth gauge attachment for iGaging Origincal digital calipers. I gave my son mine and purchased another with the OEM depth gauge. My son wanted a depth gauge also, so I designed this. I printed in PETG but any filament should…
I'm using this for a video game. You can use it for any modeling; it's not really meant to be printed, but it's still pretty cool. If you look hard enough, you can see the 12GAGE through the wax.
Youri Alekseïevitch Gagarine — Buste 🇫🇷 Description (FR) Ce buste représente Youri Alekseïevitch Gagarine , premier être humain à avoir voyagé dans l’espace et figure emblématique de la conquête spatiale. Le 12 avril 1961, à bord de la…
A simple funnel for the Gaggia Classic porta filter.
It's nearly impossible to get replacement Gaggia neon bulb assemblies, so here's a replacement design. Parts: 18 AWG silicone jacket wire BN 0.75 (22-18 AWG) crimp ferrules 230 VAC Neon Lamp - 5mm x 12 mm or 5 mm x 13mm…
My eldest makes every bed time an adventure. The longer the adventure the better for him. Delay! is his battle cry. "Five more minutes" his motto.... anything to postpone that long, long walk to bed. I found the knight as clipart online.…
Assembly Instructions Dog Mouth: The dog's mouth is printed solid to ensure high print quality. After printing, use small flush cutters (nippers) to carefully snip the small bridge/support closing the mouth. This will allow the ring to be…
Pet Semetary - Jud & Gage - Gage wants to play - 1989 3D printable model.
This model allows you to replace the funnel of a gaggia evo pro with a flush display mount for the stock lilygo t-rgb that comes with the gaggimate.
Made this to replace the weird Brigg and Riley bag strap for a more standard Travel Pro Printed out of PETG-GF. Been using for a few months without issue.
Transform your space with this stunning 3D printable Lady Gaga figurine that captures the pop icon's dramatic flair and avant-garde style. This detailed STL model showcases intricate flowing fabric textures and dynamic pose perfect for…
Bring the iconic pop sensation to life with this stunning 3D printable STL model that captures every detail in breathtaking precision. This meticulously crafted bust showcases the unmistakable features and fierce attitude that made Lady…
The original TravelPro Maxlite 2 was prone to falling over. These replacement feet give you an extra 2 inches creating a much more stable base. My luggage doesn't fall over anymore. TravelPro has since replace these feet with new ones…
Pet Semetary - Gage Flying Kite - 1989 3D printable model.
25/02/2026 - It's been 4 years, but I've finally removed the rogue part from the underside of the model and updated the page. Apologies to anyone affected. Upgraded version of my original water reservoir cover for the Gaggia Classic Pro .…
Most name tags available for 3D printing are both rigid and expose your name, address, phone number to prying eyes. This may not be ideal and certainly not needed. This two part tag printed in TPU needs no extra link and will keep your…
Text can be changed in PrusaSlicer to whatever you want; I've used surnames in the past when I hand these to friends and then program their emergency contact information into the card Recommend using a filament color that contrasts with…
I wanted a top tray for my Gaggia Classic to keep things cleaner and ensure no grounds fall down the edges of the lid from storing the tamp up there. The tray uses little material and is a tight fit but because it is thin I think it…
Somehow I managed to lose a zip tab for my luggage, so I made a replacement. While PLA is not as sturdy as the original metal, I found it good enough to hold and withstand nominal amounts of force. A mirrored model is provided for…
Old NMBS luggage cart, this was used on the railroad platforms to carry your suitcases and other stuff around. You can find one of these in the Belgian ‘Karren Museum’ or there is a green one on display in Trainwold in Brussels. Most I…
This is a adapter to inflate a BigAgnes/Thermarest (WingLock) sleeping pad with a Alpacka Raft Pumpsack. Less than two full pumps are needed to inflate a 25x72 BigAgnes Rapide SL for reference. Material: TPU Infill: 100% Scale: 100,6% on…
Here is a range of cases to enclose a 2.4", 2.8" or 4.3" Nextion screen for the Gaggiuino project. The case mounts magnetically to the front of the Gaggia Classic using 2 (or 4 if you want to be really secure) 60x10x3mm Neodymium magnets.…
With this tank riser you can close the gap between the water tank and the machine body, so that it will improve preventing dust and small particles falling in the tank. Please note that it also functions as a mini drip tray for small…
A low-profile drip tray for the GCP: Gives room for an actual mug With some minor soldering, the design pipes steam wand purging straight to the drip tray. I think my print is PLA but it would probably be better in PETG. I didn't print…
The portion of the design that attaches to the machine is the same as the original from @legojoey17, but I created a new base for the drip tray to it on. The tapered design was chipping at the edges because it was so thin, so I created a…
I created this simple template that’s perfect for your 3D printing needs. At just 0.5mm thick, this name tag is super flexible, making it less prone to breaking. Printing Instructions: • Colors: Print the name tag in two different colors…
31/08/2024 - This model is still under development. 7/09/2024 - An option has been added where the middle section of the pump mount is removed. This model is intended to replace the original pump mount (including the metal plate) for the…
Loogle's new Gaggiuino Gen 3 Screen Housing is flawless. I love the rear mount and the ability to hide the cables but since my machine is next to a wall I wanted to add the ability to rotate the screen. I've split the rear mount and added…
This is a handle for the Gaggia Classic/Pro portafilter. I could not find any model that was exactly like the original, so I just made one. This is printed in PAHT-CF using ASA as interface for the supports (tree). I guess you could print…
Not many words to say. It only shows how useful a 3D printer is. Where else i could buy such a spare part. During my last vacation lost a foot from my Wenger suitcase. So i designed a similar part and replaced all four foots. Step file…
I wanted a 20 degree front screen mount for the new Gaggiuino Gen 3 housing that had consistent outer surfaces, surrounded the switches, and preserved the outer status lights. @Livius accomplished this for the old screen, so I adapted…
Gag, that holds by gripping ones nose and chin. Mouthpiece is designed to be molded from silicone.
After experiencing a break failure of the Gaggia Version 1 switch, I created a custom frame to secure the damaged area. The frame is now glued together using 2K epoxy and seems to be working well. You’ll need to cut out the area where the…
A spacer for Gaggia Grinder RI8123/01 MD15 This is a spacer u can easily put in the top part of the grinder between the plastic and the metal cylinder. just unscrew the two little screws that keep the two parts together and place it in…
A set of gage blocks. 2 of each size. From ½" to 1/64". Plus an organizing box.
Box for engagement ring with gearbox. The box has a ring stored inside, which turns 90 degrees after opening the box. Here is video https://youtube.com/shorts/xTxo3VGdrIg Information: But right cover containe space for heart. But if you…
I designed this in Fusion 360 and included the CAD file so its easy to remix to your needs. Printed in PETG. I reinforced a tab over the original part to reduce the possibility that it would break the tab.
Gridfinity tray for iGaging 1" tubing wall micrometer
I have spare magnets (5mm x 2mm), so I decided to add holes to the original design. You might still want to use super glue to secure the magnets. I set the angle to 60 degrees with tree support to make it easier to print. I recommend…
I designed it to snap over the helmet itself which means it has to be pried open to fit into place. Consider your filament and wall count so that it doesn’t break. It takes a gentle but firm move to put it in place.
I designed a replacement water valve piston for Gaggia coffe maker water tank. The original part broken, but the coffee maker still functioning.
This what happens, if you spend too much time on improving your espresso setup… 😁 This little clip marks the center of the Gaggia Classic Pro drip tray. This is the spot, where you should place your cup for optimal espresso collection.…
I created this model based off of the left side lever. I have not tried it on the right side (mirrored print). It works fine with just one lever. I printed mine with Bambu ABS-GF and “painted” it with MEK so it feels smooth and looks…
These luggage knobs are used to elongate the already existing knobs on your bike so you can use luggage systems that use straps more easily I made them as a reference before turning. But the printed knob will also hold up nicely since the…
Attention: I keep seeing people selling my models on Esty and eBay: Digital files and actual prints. PLEASE STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
