Spot Light Loft Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Provides additional support in the loft side of spot lights
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 354
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Provides additional support in the loft side of spot lights where insulation is too heavy for the spring clips and pushes the light away from the ceiling.
The loft insulation can now sit on top of the printed part and not push the light back through. keeps it nice and flush.
These are suitable for spot light holes up to 65mm and no more then 80mm protrusion once installed.
Recommend printing in at least PETG due to potential higher temps in loft during the summer.
2 Perimeters and 10% infill, its doesn't have to look neat, printed mine with 0.8 nozzle and 0.4mm layer height.
Print upside down so no supports are required.