1 / 2
Generic modular UTP and USB cable holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stick on or screw on clamp to keep cables from falling off the table.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 44
- Makes
- 3
- Views
- 453
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To keep a network of the laptop from falling off the table I designed this clamp. Also made it a modular piece to be able to hold multiple cables.
It works for most cables, USB cables, network cables, audio cables. No supports needed.
Use the STL files for the ends to get the right orientation on the buildplate (lay flat on the flat side of it)
Use double sided tape to stick it to the surface. Use the one with screw hole to screw it using countersunk 2.5 or 3mm screw.
Need a little change? Let me know and I can maybe accommodate.