Railcore II NEMA23 Stepper Mount Rear Riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When attaching NEMA23 stepper motors with damper to my Railcore® II ZLT, I found that the shaft of the rear stepper…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
When attaching NEMA23 stepper motors with damper to my Railcore® II ZLT, I found that the shaft of the rear stepperjust barely fit into the pulley. I created this riser to fit between the top extrusion and stepper mount, raising the stepper. It now fits better and more fully engages the pulley.
Designed to work with the NEMA23 stepper brackets from Mandala Rose Works.
I used a 20mm M3 button-head bolt with a lock washer to fix the part to the printer. Without the washer, the bolt is just a little too long and bottoms out in the extrusion.
Source available in Fusion360 here.
Railcore® is a registered trademark of RailCore labs, LLC
Category: 3D Printer Parts