RTK Rover Integrated housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A RTK Rover body completely integrated, with a battery, a F9P module and a Bluetooth module.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 123
- Makes
- 0
- Views
- 708
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This integrated RTK bluetooth receiver uses a F9P module coupled to a calibrated antenna.
It's very recommended to print the parts with PETG (to provide a better protection) and to finish them with a sealant.
Some supports are necessary, please activate the support for enforcers when slicing (the support have been painted where necessary).
Also, M3 nuts are meant to be embedded in the body. There is a pause to switch filament in the provided file for the body. You don't need to change the filament, but you have to insert the nuts in their place when the printer stops. Restart the print afterward.