168 models
I wasn't really happy with the alternatives and wanted a mount that would blend in well with the antenna and the wall. My copy printed in Prusament PETG on a Mini with 0.6 nozzle, input shaper and 0.25 mm structural setting. I hope the…
Hallo, Mit der Abdeckung soll die RTK Station vor Umwelteinflüssen wie starkem Regen und Hagel geschützt werden. Die Abdeckung hat 3 Haltezapfen und kann damit sauber fixiert werden Der Remix dieser Datei hat eine 5mm tiefer Überlappung…
https://docs.centipede.fr/docs/make_rover/ * Module F9P DP0601 * Câble 6 pins fourni avec le F9P DP0601 * Module Bluetooth Hc-05 * rallonge 45° SMA * Batterie 2000 mAh * Module adafruit Power boost 1000c * interupteur * Adaptateur micro…
Custom wall mount for Mammotion Luba - this fits all their models (AWD 1000, AWD 3000 & AWD 5000). Greatly enhances the performance of the RTK antenna if you have buildings that are blocking the transmission of the signal.
I've modified the original Mammotion Luba RTK Antenna Wall Mount to include a hole along the length of the stem, allowing the cable to exit downward. This update provides an alternative solution for cable management, especially if routing…
Case for Ardusimple simpleRTK2B with lid. Dimensions 75 x 75 mm. 3D printable file case made for SKU AS-STARTKIT-BASIC-L1L2-NH-02. Construction features: - 3x metal thread ready (M3 screws) supports for motherboard raised fixing - micro…
Overview: Pole mount system with slide-in locking mechanism for Mammotion LUBA RTK reference station. ASA highly recommended Use M12 hexagon screw to secure pole from below (optional) Use appropriate countersunk screws to attach bases on…
This adapter allows you to connect the DJI-RTK2 that was shipped in late 2021 and 2022 with a standard 5/8" survey mount. No need to lug around the DJI specialized survey rod. You can also get better positional accuracy if you use this…
RTK-mount for the Luba 2 from Mammotion.
Notes: Phase offset 80mm from bottom of pole mount. Designed for m2.5 hardware. Use the (4 mounting hole) battery holder variant shown in pictures. There is a 2 mounting hole variant that will not fit because the terminals are in a…
This is a case for the ArduSimple simpleRTK2B board Category: Engineering
Made a wall mount from a standard 33mm pipe, did not want to destroy the original mounting pole so i made my own screw mount. Used PETG with 4 perimeters and 25% infill, mounted with a 3,2mm rivet to the pipe. I recommend a brim around…
Protect your Yarbo RTK-antenna with this model. Designed to cover the base under the antenna for as much support as possible. Angeled in the bottom to follow the Yarbo body. Big “wings” in the front and back, to make sticks and branches…
TPU-Reifen für Sackkarre / Transportkarre – Federnd & Pannensicher Dieser robuste und flexible TPU-Reifen wurde speziell für den Einsatz an Sackkarren, Transportkarren oder Gartenwagen entwickelt. Durch seine innovative Wabenstruktur…
Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2019: Recently aquired an old GameBoy Color and some of my favorite childhood games. Unfortunately, most cartridges came without the original cases. CartKid…
Notes: Phase offset 75mm from bottom of pole mount. Designed for m2.5 hardware. Use the (4 mounting hole) battery holder variant shown in pictures. There is a 2 mounting hole variant that will not fit because the terminals are in a…
This is a quick set of brackets for mounting the Luba RTK reference station pole somewhere. I used it to mount the pole to the side of a barn so that the reference station could be above the roof for a better view of the satellites. The…
These 3D-printable mounting templates are designed for the DJI M300 RTK , providing accurate reference points for both the top and bottom mounting positions. I created these templates to eliminate the need for repeated measurements…
A quick clamp to mount my RTK to an existing pole from an old satellite dish. The holes are made for 30mm (RTK side) to 48mm (pole side), but i guess you can change that. The file should be included. It prints supportless. I printed mine…
Notes: Phase offset 100mm from bottom of pole mount. Designed for m2.5 hardware. Use the (4 mounting hole) battery holder variant shown in pictures. There is a 2 mounting hole variant that will not fit because the terminals are in a…
Lost your Smartkey to open the Zaptec Pro and switch the breaker? Remove the front cover using the SmartKey special tool.
Dies ist eine Stand Halterung für eure RTK Antennen von Luba 2 und Yuka. Gewinde Größe beträgt M40 Die Montage Platte hat vier 5mm Löcher zur befestigung. Die Antenne wird wie beim Orginal einfach drauf gesteckt und dann festeschraubt. Um…
In order to attach my RTK antenna to a roof overhang, I needed a mounting that could be screwed on from below.
There's a great amount of RTK mounts for the YUKA (1. gen), but I couldn't the perfect match. Here's one with 90deg angle installation. Find the original antenna mount tube, in the source of this remix. Work-file added as attachment.…
Simple small box for GPS RTK module - used for Vitulus robot , but could be usefull for anyone.
I remixed this adapter plate to make it possible to raise and lower the Stealthburner and BL Touch
This integrated RTK bluetooth receiver uses a F9P module coupled to a calibrated antenna. It's very recommended to print the parts with PETG (to provide a better protection) and to finish them with a sealant. Some supports are necessary,…
Also check out the Case for the Sparkfun ZED - F9R
To help prevent the breaking of the tall RTK antennae base I designed this one with three external ribs to beef it up.
This is a tool used to rekey a Kwikset Smartkey lock that you do not have a working key for. It works by depressing the five sliders simultaneously which then allows you to turn the cylinder a quarter turn. You can then use the Kwikset…
Les cannes RTK sont généralement en 32mm de diamètre et pour utiliser le trépied D-RTK2 j'ai besoin d'un rod d'extension <30mm soit 29,90mm pour être précis. Cela me permet de fixer la Canne D-RTK 2 sur une canne GNSS classique grâce à un…
Bartkamm Perfekt für den Geldbeutel mit 0,4 Nozzel drucken.
OpenSCAD file for the SparkFun GPS-RTK-SMA Source file based on YAPP_Box Demo RealBox - transmitter/receiver v3.0 Note: Requires the YAPP_Box OpenSCAD library SKU: GPS-16481 Product link:…
Here I have designed a small cover for the mast of the RTK antenna so that the mast can remain in place in winter without water getting into the pipe from above. This has the advantage that the RTK antenna will be in exactly the same…
This is an adapter to fit the Mammotion RTK into a regular antenna pole. I created it based on this model from amazon (https://www.amazon.com/gp/product/B07BNSL21G). You can easily change the diameter for your needs on prusa slicer using…
rover GNSS RTK F9P drotek + BT HC-05 https://docs.centipede.fr/docs/make_rover/ Print instructions PETG
Adapter plate to connect a proximity sensor (tested with LJ18A3-8-Z/BX-5V) to a Zenner RTKD water meter. It allows for a flexible and therefore optimal setup of the proximity sensor. Two installation options: use the included clamps to…
Designed around several specific parts. See image for specifics
I created a holder for the RTK station of Mammotion Luba for a 38mm pipe as I used a wall holder for SAT antennas for the RTK Station on my wall. Example: https://www.ebay.de/itm/385557813497 BOM 4x M4 Nuts 4x M4x30 FHSC (Senkkopf) 4x M6…
Mammotion Luba RTK antenna wall mount for smaller mounting location + another hole for the cable facing downwards mixed the original model up and added another downwards hole for the caple and made it fit smaller for mounting location…
Basic case for the ArduSimple simpleRTK2B board with space for the WiFi module (and hopefully others too). I generally mount these boards in to tractors, so needed a case with flexible mounting options. I can screw mount or tie wrap this…
Same BOM as on Github, wiring on the right, to be attach on the outside of the 2020 extrusion.
https://docs.centipede.fr/docs/make_rover/ Print Box to build a Bluetooth GNSS rover with: * Zed - F9P DP0601 * BT HC-05 * Adafruit power boost 1000c * LiPo 2000 mha
This is a case for the base station of the simpleRTK2B Starter Kit LR from Ardusimple ( https://www.marotronics.de/simpleRTK2B-Starter-Kit-LR-IP67 ) I bought the RTK Mower Alfred ( https://www.marotronics.de/GNSS-RTK-Mower-Alfred ) and…
An mount for using the RTK antenna on a pipe/mast holder with an inner diameter of 37.5–44.5 mm. Since in my case there was already a mast on the roof for various installations, it made sense to install the RTK antenna on the same mast.…
Print the plug holder with -1mm z so it does not need support and it still works fine. The plug holder snaps into the top screw hole. Both printed with PETG beacause its better for outdoor, temperature and light.
When not using the RTK on the base station this plug is uncovered and powered. So here is and easy no support cap so I can wash my base in confidence.
printed with ABS No Supports 40% infill Voron PIF settings
As per the manual the RTK needs to come in for winter. this leaves the cable exposed and the top of the RTK pole open for water, ice and pests to enter. This top cap has a thread to make a water tight connection holding the wire in place…
Parts to assemble the HartK PCB in the Bondtech LGX extruder, and adapted for use on chains. Only you need 4 screws M3x12 and 2 head inserts M3xD5xL4 (Voron Standard) Aliexpress links: Head inserts:…
With this mount is possible to use standard 1 piece Hartk PCB on Mini Stealthburner on Voron v0.2
This adapter fits the custom DJI RTK 2 (2022) pole and allows standard 5/8" survey equipment to be attached. Essentially this is the opposite of the other adapter I created: https://www.printables.com/model/317927-dji-rtk-2-adapter I…
Moin, ich habe gestern auch meine Luba erhalten und nach der besten RTK-Positionierung geguckt, diese war auf dem Flacdach, jedoch nicht mithilfe des beiliegenden Zubehörs montierbar. Jetzt bewegt sie sich dank der verschraubten…
Voron Galileo mount to use for any version of the board made by hartk. Added a new version 3 this one sits higher for a better fit on the Voron v1 printers. V2 is still the one to use for voron v2 printers. Print Settings Printer Brand:…
A basic case for the simpleRTK3B Pro, Long Range radio module, Shield for second xbee socket, and the bluetooth module. There are only holes for the main GPS lead, long range antenna, and the POWER+GPS USB connection. The main board…
Sometimes I get bored, so I create things. If you like them, you can make them for yourself
Bracket to mount the CUAV C-RTK 2HP Hellical GPS Antenna . The antenna press fits, use M5 Screws to mount the bracket. The Antenna is raised to allow a radius bend with the SMA cable Print in PETG.
It's a vertical mount for PCB Hartk ERCF Voron 2.4 on LGX Lite You want 4 screws m3x8 and 2 heat inserts M3XD5XL4 (Standard as for the voron 2.4)
This box can be mount on a SECO rod. The antenna sensor to rod distance is 80mm. Easy swap of the extension for a more compact module, i.e. to be used under a smartphone. Changing extensions doesn't requires to access to the bare…
Original version: https://www.thingiverse.com/thing:5232416 Adapted to fit Q3 RTK HYX Composite Ringkolbenzähler from the company Pipersberg used by the water provider MAINOVA in Germany. Be aware that the ring holding the lid ist…
We modified the source model to adjust the inner-diameter for fitting the 1.46in Electronics Pole for Outside Home Antenna Installation . Used metal screws to secure the printed part to the Pole, and the RTK screws in on the top.
Specific pole piece for a specific release
Simple case for the Ardusimple RTK2B Pro board, no internal battery. Holes are included with the intent to use them as light guides for internal LEDs. They should work with typical 1.75mm transparent PETG. Both top and bottom USB C ports…
This is a super scuffed (my cad skills at time of upload are horrendous) but functional remix of the hartk pcb cover for the CW2 extruder. I have a rear facing umbilical as I'm using the hartk 2 piece toolhead pcb set for my Trident, so…
This allows a Kwikset Smartkey lock to be easily mounted into a vise. The cutaway model provides an opening to the top of the sliders for easier learning of this lock.
I've designed a custom 3D printable mounting solution for the Mammotion RTK module, the positioning brain behind Mammotion’s autonomous robot lawnmowers. This mount lets you securely fix the RTK module to a wall or wooden post , keeping…
Watched a wasp enter Lymow's RTK. I don't need a wasp nest in my RTK mount nor do I want water in the pipe. So I printed a cover. Printed on its side with tree supports and no more than 5% infill out of TPU. It's a tight fit on purpose…
There are some RTK wall mounts already, I know, but what bugged me, is one thing: none of them keeps water from running down the arm of the antenna. And yes, I also know that this might not be state of the art due to new versions without…
This is a "stronger" and "taller" version of an RTK mount. The original was a good base, but he antenna was still below the roof line. This brings it up higher and is extremely strong. The weakest point is probably the two screws that…
Lymow RTK Charger Vented Wall Mount
With this clamp you can mount the RTK Pole of the Anthbot robot lawnmower to a wall or some other flat surface. This is much more strurdy than the standard ground spike mount and prevents accidental movement of the rtk antenna. The clamp…
Want to get started with surveying but don't want to break the bank? This reasonably priced kit can be built for around $400 and will give you accuracy to a few millimeters when assisted with RTK or NTRIP correction data. Build two and…
Mount your spices to a Skadis pegboard in the Kitchen. This includes two designs, one for smaller diameter spices (Ostmann and Hartkorn fit well), and one for larger-diameter (most versions of Fuchs work). The small spice racks are…
Supports pour la fixation de l'antenne RTK des robots tondeuses Ecovacs . Un support inférieur et un support supérieur . Fixation par sangles ou colliers possible. Logement pour le passage du collier14x 4mm . Diamètre de passage du tube…
Only the extra compoments are included here. For the rest of the parts refer to original model or Stealthburner manual. Part printing guidelines Standard voron requiremnets for printed parts Required materiel 2x Zipties 1x M3 Hexnut 1x M3…
Case for an Ardusimple GPS Antenna inc. simpleRTK2B Receiver usable for high precison positioning. The case accommodates the Receiver. Adaption via Micro USB to a Tablet. How to use with third party naviation Software you will find at…
A sweet chibi fairy sitting with big ears, tiny wings, and a flower crown, gently holding a heart close to her chest. Soft, rounded shapes and a calm pose make her perfect for cute fantasy décor, gifts, and cosy shelf displays.
A simple and easy to print replacement belt clip. You can, but I would not recommend using "simple" PLA. The reason is it's brittleness and its low stress resistency. Aufgrund geringen Stressresistenz von PLA und das Bruchverhalten würde…
A simple mount to place the Here+ RTK antenna onto a ¼"-20 tripod. The thread is modeled directly into the base so you don't need to use the metal inserts. On my print the antenna clipped in snug and I don't need any glue or double sided…
Did you missed out or lost the original keychain? Worry no more! Tapping the finished keychain to the NFC reader of your phone, will direct you to the webpage showing most recently added future event. To replicate you'll need: 2…
Beim VW Tiguan 7-Sitzer werden die Gurte der 3. Sitzreihe bei Nichtbenutzung in Halterungen im Kofferraum gesteckt. Leider rutschen sie im Alltag allzu schnell heraus und behindern das Rollo der Kofferraumabdeckung. Deshalb habe ich mir 2…
This is a case for the LC29H. You can use it with direct USB to your android phone using the app “SW maps”. Make sure you configure the jumpers to USB mode (A and B together) so you can connected it to your phone. There's no need to use a…
The Mamotion bracket wasn't long enough to get out from under my eaves. So I made this bracket and used PVC to connect two of these brackets together. One bracket goes onto the RTK unit and the other to the exterior wall. In my case I had…
Red card with negative points used by teachers. Negative points in behaviour point system. Kartki używane przez nauczycieli w punktowym systemie oceniania zachowania. Printed with Bambulab A1 0.20 layer heigh / 2 walls/ 15% infill
If the temperature is expected to drop below -20C (-4F) in the winter, you should store your Lymow RTK reference station indoors to protect it from cold damage. This is a simple indoor storage solution.
A simple bracket to hold the C-RTK 2HP in place. I didn't want to risk it coming loose inside my rover , this bracket adds some support. It holds the C-RTK 2HP firmly , I would also add some double sided tape. Mount the bracket with M4…
Hi, here´s a small housing for the ProfiCNC Here 3 & Here+ RTK base station. It´s made out of three parts: bottom, top and seal. The seal should be printed with flex material (TPU). You´ll need 4 x M3 screws with nuts. Have fun, Köter
Material: PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 25 % / Support 15% Kein zusätzliches Material erforderlich / no additional material required Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be…
This adapter will allow you to mount the Segway Navimow (i110 at least) RTK to chainlink fence posts. This may allow other "poles" that are about 1" (25.4mm) thick to attach to chain-link posts. There is a extra little "hole" on the side…
Many will complain that there are already screw holes on this. But if you're like me and want to store things for the winter, it's a lot easier to take everything down :p This is a holder for the RTK antenna adapter. For outdoor use print…
Its the missing smartkey holder for the key blade. The remote can be purchased at motor-X and the blades at aliexpress.
This is a remix from @HandsOnKatie_827995 prints ( thanks ! ) Adapted for vertical corrugated sheet wall.
I needed a new Start Button for my Scooter so i designed one
Library you will need if you want to mess with the OpenScad https://github.com/vector76/gridfinity_openscad/
Beschreibung: Dieses Modell habe ich entwickelt, um das Einsetzen von Einschmelzmuttern bei der Dartkamera- und LED-Ringhalterung von 3DEngelen zu erleichtern. Mit dieser Einschmelzhilfe (Maße: 200 mm x 124 mm x 50 mm ) lassen sich…
There are many unused satellite tv antennas whose mount works perfectly to an mount your Mammotion RTK antenna. There are also cheap roof mounts <$20 online. I've included STL's in case you have to modify the OD (outer diameter) of the…
Port covers for Portkeys BM7 II DS (may work on other monitors as well) List of Covers: single SDI double SDI tripple SDI SDI2 & HDMI In & Out 2-Pin Lemo Motor Control (DC IN Port available on request) !!! I highly recommend printing in…
## Stapelbarer 3D-gedruckter Transportkoffer mit austauschbaren Einsätzen Ich möchte meinen selbst entworfenen, 3D-druckbaren Transportkoffer kostenlos mit der Community teilen. Er eignet sich ideal für die übersichtliche Aufbewahrung und…
