Brembo Racing Brakes extruder visualizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Do you like the speed? then you need a good brakes.
- Rating
- 4.8 / 5
- Likes
- 870
- Downloads
- 1,363
- Makes
- 19
- Views
- 19,596
- Reviews
- 30
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Do you like print like in a race? Then you will need a good brake (just joking).
How to print it?
- Can be printed with 0.4mm or 0.25mm nozzle, I recommend to use the 0.25mm in order to increase the quality of the letters on the brake calipers.
- There is no need to use MMU because the color change is made by different heights.
- I recommend to use the 3mf so all the color changes and supports are already defined, just slice, print and enjoy
What you will need to make this marvelous extruder visualizer?
- 1x Magnet 4x8mm
- A little bit of super glue
How to assemble it?
- Glue together the brake calipers and fit them in the mount aligning the two holes, you can use a little piece of filament to fit them together. See the photos.
I took the mount from here https://www.printables.com/es/model/189922-the-real-bondtech-gears-visualizer and modified to fit the calipers.
Hope you like it!