Polymer buffer for S&W Victory .22lr
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Polymer buffer for S&W Victory .22lr This original part gets hell lot of beating when shooting with suppressor. I…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 43
- Makes
- 0
- Views
- 476
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Public Domain
Polymer buffer for S&W Victory .22lr
This original part gets hell lot of beating when shooting with suppressor.
I designed direct replacement.
Printed in PET-G, works perfect.
PLA will be too brittle for this part.
I will be trying to print it in nylon
2 files attached:
buffer.stl - just the buffer
buffer_for_print.stl - added supports and cut on the hole so there is no cleanup in the hole required.
Print Settings
Printer:
Printo3D i3 clone
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.1-0.2mm
Infill:
80%
Filament:
any PET-G or Nylon
any
Notes:
buffer.stl could print fine on well calibrated printer (unsupported overhang). Hole may need some clean up or drilling. Hole size is 2.4mm (aprox. 3/32")
buffer_for_print.stl - you need to remove thin support. Hole should not need any cleanup. Hole size is 2.4mm (aprox. 3/32")
Category: Sport & Outdoors