1 / 3
1913 Angled Grip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Picatinny angled foregrip modeled after the Fortis SHIFT.
- Rating
- 0 / 5
- Likes
- 49
- Downloads
- 271
- Makes
- 1
- Views
- 1,111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Remix of my original M-Lok grip, but for 1913 rails. Big thank you to FFFTechnology for the picatinny rail and mount models (see "This remix is based on" area below for links).
Print Orientation
The model is oriented in the correct position (upright at an angle with the back face down). Orienting the model this way will only require supports for the first overhang. See photo above for reference.
Hardware
Utilizes (2) M5 30mm bolts and (2) matching M5 nuts.
Settings
- Material: PLA+
- Nozzle: .4mm
- Layer height: .12mm
- First layer height: .2mm
- Perimeters: 6
- Infill: 100% (may not be necessary, but why risk it)
- Hotend: 225°
- Bed: 60°
- Supports: On buildplate only. Supports only needed for initial overhang of 1913 interface (see photo)
- Fuzzy skin (optional): External perimeters
- Thickness: .1mm
- Point distance: .1mm