Counting matching models…
Vertical foregrips for 1913 rails modeled after the KAC VFG. No bolts needed, just align the grip body on the rail and tighten the grip screw. Print 1 standard or stubby grip body, and 1 respective screw. Print Orientation The STLs are…
German Kugel Grenade Model 1913 (11/18/2024) Added grenadeandpin2.3mf and its corresponding G-code -Took 3dbob's advice and added about 1% to the x and y on just the Grenade body. Should help with a better pin fitting and ease of screwing…
I took the original Christmas Tree (Thing 1913982) and used a cone shape in Tinkercad to create a hole in it. It was printed in a Exelvan transparent filament using Vase Mode to create a clearer looking tree, and also a Yellow Gold from…
V3 update! Stronger 1913 interface, cleaner look! A simple triangle stock for 1913 rails, basic and comfy, with a sling slot. Requires x2 M5x30 and x2 m5 nuts. Print with the bottom flat side on the bed with organic supports on bed only.…
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s Here's an overview of the Indian Motorcycle Double Cylinder 1913: The Indian Motorcycle…
Requires M5 tapered head screws and M5 M-Lok nuts. Print outside of rail down on bed, no supports needed!
1913 Bugatti Type 22 Torpedo https://youtu.be/PVl3cEkSSo0?si=QV8NKKV6G-LAw_vm https://youtu.be/orNbJ3KgBIU?si=_lESjRb1NG5c3Ji0 Fewer than 5 made. Designed from screenshots from YouTube videos in blender Printing instructions Pieces fit on…
Remix of my original M-Lok grip, but for 1913 rails. Big thank you to FFFTechnology for the picatinny rail and mount models (see "This remix is based on" area below for links). Print Orientation The model is oriented in the correct…
Where's the beef !?!?! Right here! If other printed stocks have let you down this beast is designed to last! Use PLA+ or better. 6 walls. 50% infill or better. Non printed parts - Two m4 screws and nuts. Buttstroke to the head! Move!
This is for an airsoft model and will literally not work on the real thing, which has a totally different mounting system, don't waste your time. This is a quick and dirty buttstock rail adapter for the KWA/KSC VZ61 GBB/GBBR Airsoft Toy.…
Cheap means to mount an expensive light on your airsoft toy. Suggested to use minimum PLA +/pro, heat warp due to extended use of flashlight is plausible. Parts List: amazon links 1x 40mm M4 screw 2x 30mm M4 screw 3x M4 Nylock Nuts 3x M4…
None of the locking keys of 1913 style provides a great fit for my Streamlight TLR-7X on my Sig Sauer P365 XMacro. So I made one for myself. If need to deal with real recoil obviously you'd want to print in some durable material. I…
Utilizes SB 1913 hardware and hinge to accept standard mil spec buffer sized stock.
Title basically says it all. If you want to throw on an MCX stock or whatever, you can use this adapter.
Streamlight doesn't sell these as far as I could see (unlike TLR-1, 3/4, or 7/8 keys) so I cloned them. Now you can replace your keys without buying a new $300 light.
Made for my Dads midlife crisis this 8inch diameter sign looks great in the Garage! Print instructions Colour change by layer height. .2mm layer height resolution. slot in back for drywall anchor.
Will need three M3*6 machine screws w/ heat inserts & one M5*12 machine screw w/ heat insert. Non folding adapter.
Created with photogrammetry (freeware: VisualSFM + Cloudcompare + Blender + Meshmixer) When you are interested in Lowest Budget 3D Scanning, you might also like: https://www.thingiverse.com/thing:2755968 Check out my other collections of…
Art Nouveau Bas Relief : 1913
The bolt is secured by rotating the bolt handle. This also releases the bolt spring. This is especially useful if you store your bolt outside of your rifle. I printed it using PLA, which works fine, but feel free to use any material you…
Picatinny Wall Mount designed with standard Mil-Spec dimensions. I use them to hold reloading accessories to the wall with my other mounts. I am adding more designs here and on my website https://azjake.com/ . I also have the downloadable…
Part fitmemt is too tight, awaiting feedback for improvement Remix of a buffer tube adapter that was made for a WE KAC PDW Gbbr, modified to be a picatinny 1913 rail adapter for universal style stocks. Two versions available , in one the…
This is an adapter that allows you to mount a 1913/Picatinny stock to your Mac11 variant. I only have a VMAC9 to test on. The mount is held by an M3 bolt and nut through the bottom hole in the receiver, which doesn't interfere with the…
1913 Adapter for use with the Hybrid Mosquito toy gun as well as to pair with the fixed stock remix. Can be used standalone for simplified printing or assembly or be used with aftermarket SIG-type 1913 folding stocks
1" Ring. The mount is a MIL-STD 1913 with a weaver style mount. As you can see it fits a picatinny nicely. I just opted not to make it with placement bolt. Made for my S&W SD40VE, but with more adjustment. I originally made it for my AR15…
This is to put a 1913 picatinny folding stock on your Cobra Adder crossbow. This model does fit snug so don't feel shy about using a machinist's hammer with a rubber tip to knock it down in there. (To remove you may need to pry it out…
Limbered version of Windham Graves ' excellent Schneider 105 mle 1913 in both horse-draw and motorised versions. The gun barrel was separated from the cradle and moved to its travel position. Modern road wheels were added to the firing…
Umarex Notos 1913 Grip Designed for the Umarex Notos. This design has not been tested on the Umarex Notos Gen 2, so compatibility with the Gen 2 is not guaranteed. It’s time for the Notos to lose a few inches! This replacement grip adds a…
Print with 0.4mm nozzle and 0.15-0.2mm layer height. 2.5mm walls and 40% infill at 220°C for maximum strength. Orient with the rail mount side down. Use a support interface for easy removal. Because of the large surface area, some designs…
Model for PiKVM DIY case for RPi Zero 2W with WAV-19137 HDMI To CSI Adapter. HDMI To CSI https://www.welectron.com/Waveshare-19137-HDMI-to-CSI-Adapter_1 Otherwise 2.5mm standoff & screws. Standoff used: 12mm. Print quality poor, could not…
This is a dimensionally compatible replacement part designed to fit furniture systems that use the 191315 connector type. It is intended as a repair or spare component for users who need to replace a missing or damaged original part.…
These AK adapters are made for AKM (with or without tang) to a mil-spec AR buffer tube or 1913 picatinny rail. Materials ----------------- Reinforced versions take three to four M4x20 button head bolts to prevent layer separation for…
I just needed a simple stock model to toss on a nerf blaster that I'm working on. It's nothing terribly fancy, but it works. Good for both nerf and airsoft applications. Stock pushes up to fold, and pulls out to extend. If your stock…
You will need some m3 allen head screws and m5 screws and nuts to assemble things. The short strut will let you get down lower on the stock if the standard one is too high. It's recommended to print all the structural parts with 10 walls…
The spare tyre carriers on VW Transporters have spacer sleeves on their support bolts which are apparently intended to prevent over tightening of the carrier. Unfortunately despite being designed to be held on captive “barbed” bolts, they…
Opened up the hole for Walmart style 29mm lights.
Softjaw clamps designed to hold your receiver securely without marring or damaging the body. Best printed in PETG or PLA+ (I don't reccomend use Carbon fiber or Glass filled Polymers as those are slightly abrasive) Print with 4 walls and…
there's a right and left version. in the image, the cup on the left was printed vertically and cup on the right was printed horizontally. they were printed at the same time with 0.1 layer height, a 0.4 nozzle and supports on bed only.…
1913 railed endcap for wtf9 prop gun. Category: Sport & Outdoors
This plate allows the user to position the needle for straight stitching. Use the CAM setting, insert plate, and then use the width dial to put the needle where you want it. I tweaked a previous model and the print is a little ugly, but…
A tested picatinny rail profile to remix into whatever you need. ***This is NOT NATO (metric) pic rail*** This is MIL-STD-1913 (english) Profile!
Ever wanted to mount a picatinny bipod on your very own airsoft M249/Mk46 because the stock one was pissing you off, but you still wanted a bipod that would swivel around the gas block? Are you just too cheap to shell out a fortune for a…
Picatinny Mount designed with standard Mil-Spec dimensions. This was made to hold reloading accessories mounted to the bench behind my Dillon 550. The design was inspired by accessories made by https://azjake.com/ .
Picatinny Mount designed with standard Mil-Spec dimensions. This was made to hold reloading accessories mounted to the back of my reloader bench mount behind my Dillon 550’s. The design was inspired by accessories made by…
Ever wanted to mount a picatinny bipod on your very own airsoft M249/Mk46 because the stock one was pissing you off, but you still wanted a bipod that would swivel around the gas block? Are you just too cheap to shell out a fortune for a…
map of the Kingdom of Greece (1913)
This is to put a 1913 picatinny folding stock on your Cobra Adder crossbow. This model does fit snug so don't feel shy about using a machinist's hammer with a rubber tip to knock it down in there. (To remove you may need to pry it out…
This is a dimensionally compatible replacement part designed to fit furniture systems that use the 191315 connector type. It is intended as a repair or spare component for users who need to replace a missing or damaged original part.…
V3 update! Stronger 1913 interface, cleaner look! A simple triangle stock for 1913 rails, basic and comfy, with a sling slot. Requires x2 M5x30 and x2 m5 nuts. Print with the bottom flat side on the bed with organic supports on bed only.…
![[STD] Picatinny 20mm mil-spec 1913 Profile [Tested] Blank Step File](https://media.printables.com/media/prints/ae83917e-57ac-43c6-b501-ad04cbccfae2/images/13028364_50f09e8e-f44a-4352-a6a9-f1f1cb8b64f7_682f40f9-4c3b-4125-8682-525906da0e1b/std-picatinny-20mm-mil-spec-profile-tested-blank-step-file.png)
