A camera for a microscope
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.35 – €0.43 net (excluding VAT)
For file: estructuracolumnas_02mm_pla_mk3s_29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.39 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 28.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Camera to mount under a microscope and visualize the images via html on a monitor.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 40
- Makes
- 0
- Views
- 1,328
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution
Camera to mount under a microscope and visualize the images via html on a monitor.
In addition to the printed pieces you need:
- 4 screws M2.5 x 25mm (or M3 if the Pi holes are enlarged)
- 2 x M2 x 1mm screws
- 1 screw M3 of plastic, metal type computer case or normal M3 (10mm)
- 1 square nut M3
- 4 nuts M2.5 (or M3)
- 2 M2 nuts
- Pi camera version 5Mp with cable
- Raspberry pi 3 A +
- micro SD
- Microscope
To test the result you can use the code provided on the camera's website:
https://picamera.readthedocs.io/en/latest/recipes2.html#rapid-capture-and-streaming
Cámara para montar en microscopio y visualizar las imágenes via html en un monitor.
Además de las piezas impresas se necesita:
4 tornillos M2.5 x 25mm (o M3 si se agrandan los agujeros de la Pi)
2 tornillos M2 x 1mm
1 tornillo M3 de plástico, de metal tipo caja de ordenador o normal M3 (10mm)
1 tuerca cuadrada M3
4 tuercas M2.5 (o M3)
2 tuercas M2
Pi camera versión 5Mp con cable
Raspberry pi 3 A+
microSD
Microscopio
Para probar el resultado puedes utilizar el código suministrado en la web de la cámara:
https://picamera.readthedocs.io/en/latest/recipes2.html#rapid-capture-and-streaming
Print instructions
20% infill
0.4 nozzle
0.2mm
PLA