1 / 7
Cake-Drybox for DAS FILAMENT XXL Spool w/ Dust Filter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've bought a XXL spool from DAS FILAMENT and didn't pay attention to the dimensions, so I learned the hard way that…
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 78
- Makes
- 0
- Views
- 1,816
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I've bought a XXL spool from DAS FILAMENT and didn't pay attention to the dimensions, so I learned the hard way that it won't fit inside my drybox. I had to find a solution and I think I've found one in a cake storage box... ;)
Materials you'll need
- Sunware Cake Storage Box [Buy at Amazon DE]
- 1 Pcs. M4x12mm Bolt (for the dust filter)
- 4 Pcs. M4x16mm Bolt (for the pedestal)
- 5 Pcs. M4 Nyloc Nuts
- 3 Pcs. M5x50mm Bolt (for the spool holder)
- 3 Pcs. M5 Nyloc Nuts
- 1 Pcs. M5 Nut
- 4 Pcs. M5 Washer (mine have a diameter of 20mm)
- 3 Pcs. 608ZZ Bearings
- 1 Pcs. Smooth or Threaded Rod, diameter: 8 mm, length: 90 mm (I prefer a smooth rod)
- 1 Pcs. Sponge (for the dust filter)
- 1 Pcs. M6 Bowden PTFE Coupler (optional)
Print instructions
G-code file provided is sliced for a MK3S and Prusament PETG.
I've used the following print settings (0.20mm QUALITY):
| Part | Top/ Bottom Layers | Perimeters | Infill | Supports |
|---|---|---|---|---|
| cake_drybox_spool_holder.stl | 5/4 | 4 | 25% | No |
| cake_drybox_spool_holder.stl | 5/4 | 2 | 15% | No |
| cake_drybox_washer.stl | 5/4 | 2 | 100% | No |
| cake_drybox_knob.stl | 5/4 | 2 | 15% | No |
| cake_drybox_dust_filter.stl | 5/4 | 2 | 15% | No |