1 / 7
Cake-Drybox for DAS FILAMENT XXL Spool w/ Dust Filter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've bought a XXL spool from DAS FILAMENT and didn't pay attention to the dimensions, so I learned the hard way that…
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 1814
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (1)Kolekcje (54)Powiązane
I've bought a XXL spool from DAS FILAMENT and didn't pay attention to the dimensions, so I learned the hard way that it won't fit inside my drybox. I had to find a solution and I think I've found one in a cake storage box... ;)
Materials you'll need
- Sunware Cake Storage Box [Buy at Amazon DE]
- 1 Pcs. M4x12mm Bolt (for the dust filter)
- 4 Pcs. M4x16mm Bolt (for the pedestal)
- 5 Pcs. M4 Nyloc Nuts
- 3 Pcs. M5x50mm Bolt (for the spool holder)
- 3 Pcs. M5 Nyloc Nuts
- 1 Pcs. M5 Nut
- 4 Pcs. M5 Washer (mine have a diameter of 20mm)
- 3 Pcs. 608ZZ Bearings
- 1 Pcs. Smooth or Threaded Rod, diameter: 8 mm, length: 90 mm (I prefer a smooth rod)
- 1 Pcs. Sponge (for the dust filter)
- 1 Pcs. M6 Bowden PTFE Coupler (optional)
Print instructions
G-code file provided is sliced for a MK3S and Prusament PETG.
I've used the following print settings (0.20mm QUALITY):
| Part | Top/ Bottom Layers | Perimeters | Infill | Supports |
|---|---|---|---|---|
| cake_drybox_spool_holder.stl | 5/4 | 4 | 25% | No |
| cake_drybox_spool_holder.stl | 5/4 | 2 | 15% | No |
| cake_drybox_washer.stl | 5/4 | 2 | 100% | No |
| cake_drybox_knob.stl | 5/4 | 2 | 15% | No |
| cake_drybox_dust_filter.stl | 5/4 | 2 | 15% | No |