Flir One Pro Lepton PureThermal clone case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I bought a broken Flir One Pro in mind to repair the issue it had. Unfortunately i was not able to do so. I'll took…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I bought a broken Flir One Pro in mind to repair the issue it had. Unfortunately i was not able to do so. I'll took the Lepton 3.5 Image-Sensor which stitheas quite a value.choose
I was looking for a PureThermal 1/2/mini but as it has quite a hefty price and i did not now if thle lepton is working i choosen a cheaper clone from china.
This clone is basically a PureThermal 1 without any push-buttons but the firmware is the (mainly) the same as on the Open Source GitHub repository
Mine was delivered with the purethermal Firmware v1.0.0 which was working fine. I'll updated the firmware to v1.3.0 with a ST-Link. To get the firmware working you need to comment-out the following line in /Src/main.c
"PT_SCHEDULE(button_task(&button_task_pt));"
to
"//PT_SCHEDULE(button_task(&button_task_pt));"
The firmware provided here will not work, because it would require the push-buttons the original PureThermal 1 has.
The case is using the protection (germanium) windows out of the Flir One Pro, I'll removed the sensor. The main case containing the camera mount just goes over it.
On this example Youtube Video it was just pluggen in into OctoPrint.
The GetThermal (Linux/Mac only) will tell you also the measured temperature.
Category: DIY