USOS Seaview in 3 pieces
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I sectioned it in three pieces and made a center section without periscopes so you need no support. I printed them on…
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 384
- Makes
- 3
- Views
- 1,528
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I sectioned it in three pieces and made a center section without periscopes so you need no support. I printed them on end. 200% gave me a 17 and 3/4 inch model when assembled. It came out good. I printed it with direct drive and a .6 nozzle. It took 15 hours. I gave pictures of how it printed on the machine so you can see the set-up. The pin was tight, I took the front and middle section bunched up a towel against my chest and pulled it together with 2 hands, I started the pin in the tail and pulled it into the front 2 sections. The tail is not up to taking that kind of pressure and will bust the fins.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Infill:
20
Category: 3D Printing