Orbiter 1.5 Direct extruder for Prusa MINI Bear
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the ZOrbiter 1.5 adapted for Prusa MINI Bear
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 77
- Makes
- 1
- Views
- 1,425
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
ZOrbiter 1.5 for PrusaMINI Bear
This is the adaptation of the ZOrbiter 1.5 extruder for the Prusa MINI bear conversion. As we were looking for a lightweight extruder this was a very cool option and works pretty well, many thanks to ZARIBO for share this extruder.
Flavors
There are two different flavors
- Delta-P fan which is based on the TEOOKIE Delta-P fan for MK3S+
- Stock fan shroud, which is based on the stock fan shroud for the Prusa MK3S+
IR Sensor integrated
As you suppose the IR Sensor is integrated on the extruder, many thanks to Kim Kyoung Joong for the fs-lever which has been used on this model.
Print settings
We recommend to print it on PETG with 20%-30% of infill for the whole extruder except for the fan shroud which should be printed on ASA/ABS
Profile configuration
You will need to adapt the current for the extruder adding the M907 instruction to your initial G-Code
M907 E320 ; reset extruder motor currentAlso we have published the profile on our GitHub