Orbiter 1.5 Direct extruder for Prusa MINI Bear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the ZOrbiter 1.5 adapted for Prusa MINI Bear
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 1424
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
ZOrbiter 1.5 for PrusaMINI Bear
This is the adaptation of the ZOrbiter 1.5 extruder for the Prusa MINI bear conversion. As we were looking for a lightweight extruder this was a very cool option and works pretty well, many thanks to ZARIBO for share this extruder.
Flavors
There are two different flavors
- Delta-P fan which is based on the TEOOKIE Delta-P fan for MK3S+
- Stock fan shroud, which is based on the stock fan shroud for the Prusa MK3S+
IR Sensor integrated
As you suppose the IR Sensor is integrated on the extruder, many thanks to Kim Kyoung Joong for the fs-lever which has been used on this model.
Print settings
We recommend to print it on PETG with 20%-30% of infill for the whole extruder except for the fan shroud which should be printed on ASA/ABS
Profile configuration
You will need to adapt the current for the extruder adding the M907 instruction to your initial G-Code
M907 E320 ; reset extruder motor currentAlso we have published the profile on our GitHub