Cam lock towel holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Towel holder
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 73
- Makes
- 1
- Views
- 462
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
My in-laws had some cam operated towel holders from around the 1970’s and could not locate replacements.
The following OpenSCAD script generates a close approximation to the original. Printed with no support or rafts.
To use this grip/holder you need to print the 3 parts (base and two lobes) assemble them by pushing the lobs onto the pegs in the base. There is a feature built into the lobe to retain them on the peg using a bump which locates in the grove at the top of the peg.
Once assembled you put a sticky foam pad onto the back and attach to a wall. Ensure the lobes are not angled down and they should be facing each other. If they are pointing down then rotate the base 180 deg.