Cam lock towel holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Towel holder
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 462
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
My in-laws had some cam operated towel holders from around the 1970’s and could not locate replacements.
The following OpenSCAD script generates a close approximation to the original. Printed with no support or rafts.
To use this grip/holder you need to print the 3 parts (base and two lobes) assemble them by pushing the lobs onto the pegs in the base. There is a feature built into the lobe to retain them on the peg using a bump which locates in the grove at the top of the peg.
Once assembled you put a sticky foam pad onto the back and attach to a wall. Ensure the lobes are not angled down and they should be facing each other. If they are pointing down then rotate the base 180 deg.