Baofeng UV 5R battery latch BAOFENG lock
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.31 – €0.38 net (excluding VAT)
For file: Baofeng UV5R battery latch v2_0.1mm_PLA_MK3S_30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.34 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 30 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A better latch for Baofeng UV 5R battery
- Rating
- 5 / 5
- Likes
- 70
- Downloads
- 732
- Makes
- 5
- Views
- 2,788
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The battery latch of one of my Bafeng UV5R broke. I looked on the internet for a 3d printed replacement, I only found a solution on Youtube, but the printed latch was far from functional. Therefore I designed a new one in order to better fit the radio and to work as the original one. With 0.1 layer height, recycled PLA and Prusa MK3s printer, the latch takes 30 minutes to print. The supports are incredibly easy to remove (Thank you Josef Prusa!) and no post printing processing is required.