EVA 2.4 for LGX lite on MGN9 linear rail
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
EVA 2.4 for LGX lite on MGN9 linear rail based on MFBS « Fast swap series »
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 121
- Makes
- 1
- Views
- 1,796
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is an adaptation of MFBS "Fast-Swap series" to improve weigth while retaining rigidity for MGN9H rails.
[20220714] New top mount design featuring integrated slots for endstop.
Other compatibilities with original EVA 2.4 remain but you can also consider one of my other mods like XY-joiners reinforced for carbon gantry or tensionner-less back plate.
For assembly you should use brass inserts from Ruthex (or similar): short M3x4.6x4mm
A smart solution to move tensioners on printer frame can be found here: https://store.brs-engineering.com/
This design has been developed from Pawel Kucmus's brilliant EVA eco system and inherits the same GPL license a the original.
This is not intended to be a replacement for the EVA system but rather a mod that better supports a limited range of hot ends and extruders.
For more information on the brilliant EVA system please see: https://main.eva-3d.page/
Print Settings
Printer:
RatRig Vcore-3
Rafts:
No
Supports:
Yes (Only for top mount from build plate)
Resolution:
0.2
Infill:
30%
Filament:
/ /
Category: 3D Printer Parts