Dice-shaped flower pot cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a flower pot cover designed to look like a dice.
- Rating
- 5 / 5
- Likes
- 55
- Downloads
- 190
- Makes
- 1
- Views
- 741
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a flower pot cover designed to look like a dice. It fits standard plastic pots up to 15 cm in diameter.
Print instructions
For the main body of the pot, I have used a standard 0,3 mm DRAFT profile for PLA and changed:
- number of perimeters 2 → 1
- bottom layers 3 → 2
- top layers 4 → 3
- 8% grid infill
in order to save some material and time. As you can see surface finish isn't the best and there is a lot of transparency (because of 1 perimeter only), so you should keep that in mind if you plan to use my g-code :)
For dots, I just used a standard 0,2 mm profile in Prusa Slicer. You will need 14 dots for the entire pot. They are slightly conical in shape, so they fit only one way in their holes. I glued them in place using superglue.