1 / 3
Rainbird connectors for 1/2" ID hose
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multiple models available here: Connector 1-to-1: An exact model of the connector manufactured by Rainbird. Not really…
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 306
- Makes
- 2
- Views
- 1,294
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Multiple models available here:
- Connector 1-to-1: An exact model of the connector manufactured by Rainbird. Not really printable.
- Connector Printable: 1/2 of the connector, modified slightly to enhance printability (overhangs tapered). To use these, you'd have to print 2 and glue them together. For most people, this is the one you should print.
- Connector Vase: This is a solid model, intended to be printed in vase-mode, using a very large nozzle (ie: 1mm). If doing so, use a ~1mm-tall, ~3mm-wide skirt, 0 bottom layers, and 0 top layers. This is only half the connector, so print 2 and glue them together afterward.
Category: Outdoor & Garden