1 / 8
Electrical Bracket for Drywall | Old Work Low-Voltage Box | 1-Gang
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed a bracket for running low-voltage wires in drywall.
- Rating
- 4.889 / 5
- Likes
- 246
- Downloads
- 1,552
- Makes
- 8
- Views
- 4,993
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
If you find this file valuable a $1 Venmo donation would be awesome! Thank you!
- Designed to work with two 1.5-inch drywall or wood screws.
- Run the screws in and out of the clips a few times to reduce friction.
- Don't overtighten or use a power driver. The excess torq may crack the print.
- It has threaded holes to attach a faceplate.
- I print mine on 0.30mm Draft.
UPDATE @claylinco generously made some variants and mods to the file. There are now 2, 3 & 4 gang brackets! “I've modified it to have center markers and holes to mark the cut line on the wall.”