Parametric Z motor mount spacer for the Ender 2 / Ender 3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Ender 2 (and Ender 3) Z-motor mount holds the motor about 1mm too short from the aluminium extrusion, causing the…
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 94
- Makes
- 1
- Views
- 849
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
The Ender 2 (and Ender 3) Z-motor mount holds the motor about 1mm too short from the aluminium extrusion, causing the lead screw to be held at an angle, instead of it being parallel to the extrusion.
This causes the lead screw to bind, especially when the nozzle is close to the bed.
My Ender only needed a 1mm spacer, but with the Customizer, you can change this thickness to any value you need (up to 10mm).
You can also adjust the diameter of the bolt holes, should you find that the holes print too small (or too large) - I printed mine at 4.5mm, you might need a larger hole if you print using PETG.
Use the 'Open in Customizer' link above, or use this link https://goo.gl/PM8FjP
(I have no idea why Thingiverse own links don't work in this description box, so I had to use a google URL shortener...)
Print Settings
Printer:
Creality Ender 2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Category: 3D Printer Parts
