1 / 2
Supports for shelf with old skateboards
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Supports to build a shelf with old skateboards
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 24
- Makes
- 0
- Views
- 272
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
Supports to build a shelf out of old skateboards.
No supports needed when printing. Higher density is better, I used 25%.
- Two screws through the board, you can use the skateboard hardware
- Two screws for each leg, but you can get away with only one.
- Floor brush sticks for the legs, but anything similar will do.
Haven't tested how much weight it can handle, but I have been using it for a couple of months with up to 6kg of filament on top of it.
Since the boards are concave they work really well as a filament shelf, they prevent the spool to roll out of the shelf.
It wobbles a bit, but you can probably stop it from wobbling by screwing some sort of cross on the back.
You can probably build one with more than 2 boards, let me know if you try.