Depth stop bracket for drill press
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Depth stop bracket for a drill press that replaces the original part that has too much flex for accurate depth setting.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 57
- Makes
- 0
- Views
- 535
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The original depth stop bracket on my drill press was flexing when it hit the stop.
This meant that the depth stop could not be adjusted accurately.
To solve this issue, I designed a more rigid version of the depth stop that does not flex.
To prevent bending print with >40% infill.
I tested PLA Tough, 40% cubic infill with Cura 5.0 on an Ender 3 S1 Pro.
Be aware that the drill chuck must be removed to mount the bracket.
Designed for a 1988 Sirox CH3, but might work on more models and versions.
Check the attached drawing for key dimensions.