1 / 5
SKADIS - IVAR Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SKADIS mount for IVAR: tight fit, optional M4 nuts. Print in PETG, needs 8 M3x20 screws. Pre-drill wood to avoid cracks.
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 142
- Makes
- 3
- Views
- 1,928
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
SKADIS fits IVAR perfectly, requiring only these four little additions. The hole in the mount is tight enough to secure the pegboard without a nut, but you can always add an M4 nut for extra security.
Print in any material; I used PETG with 3 perimeters and 20% infill.
You'll need 8 M3 x 20 wood screws. M4 nuts are optional. Pre-drill 2mm holes in the wood to prevent cracking.