Weight Watchers Scale Foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Weight Watchers Scale Foot
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Weight Watcher (WW) Stand on digital Scale - Foot ; Spare Parts
This is a foot to replace the plastic feet on the Weight Watchers scale that we have at home.
Foot Size is roughly:
- 26mm outer diameter
- 15mm inner diameter
- Spacer height 6.5mm
- Full height 9mm
There are two styles, one similar to the original, but some areas slightly thicker for strength and one more solid print, should work the same, but looks more solid, unlike original feet.
My prints were a really good snug fit.
I printed my foot solid (100% infill), this took 1.2m length of filament and took 30 mins ;
at 20% infill this was 760mm filament length 17minutes to print. No supports required if printed with thick round base on the bed.