Rocker switch insert for Adafruit Circuit Playground Magic Wand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An insert for using a rocker switch in the Adafruit Circuit Playground magic wand. Original uses push button module.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 29
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Share Alike
This is an insert for using a 10 x 15mm rocker switch from Digikey in the Adafruit Circuit Playground magic wand. The switch model is Digikey part CH865-ND but any switch with similar dimensions will work.
I provided the CAD model files for Fusion 360 and Solidworks if you want to customize the cutout for another switch. There are limits to the depth of the switch you can use without modifying the handle.
Print Settings
Printer: Ender 3 Pro w/ direct drive
Material: PLA or PETG
Rafts: No
Supports: Yes
Resolution: 0.15-0.2mm
Infill: 15% or higher
Shells: 2+