25mm miniature base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This 25mm diameter mini base can fit most small miniatures, and has a cutout in the bottom to fit a magnet or a weight.
- Rating
- 4.833 / 5
- Likes
- 26
- Downloads
- 1,011
- Makes
- 5
- Views
- 2,375
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Characters & Monsters
- License
- Creative Commons — Public Domain
This simple base can be printed fairly quickly, although I recommend printing it solid, so there is no holes. I also recommend printing it with the top down, as the model is oriented, as to get the best results.
The base has a diameter of 25mm and is 3mm thick, although it can easily be scaled to make it a bigger base for larger models. In the photo, the smallest one is 100% scale, then 125% and 150% respectively. note: I recommend scaling it only in the x and y axis if you are scaling it up fit a larger model, as scaling it in the z axis will probably make it thicker than you want.