25mm miniature base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 25mm diameter mini base can fit most small miniatures, and has a cutout in the bottom to fit a magnet or a weight.
- Ocena
- 4,833 / 5
- Polubienia
- 26
- Pobrania
- 1011
- Wydruki
- 5
- Wyświetlenia
- 2375
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Public Domain
This simple base can be printed fairly quickly, although I recommend printing it solid, so there is no holes. I also recommend printing it with the top down, as the model is oriented, as to get the best results.
The base has a diameter of 25mm and is 3mm thick, although it can easily be scaled to make it a bigger base for larger models. In the photo, the smallest one is 100% scale, then 125% and 150% respectively. note: I recommend scaling it only in the x and y axis if you are scaling it up fit a larger model, as scaling it in the z axis will probably make it thicker than you want.