1 / 12
Phanteks Evolv Shift XT AIO Mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Phanteks Evolv Shift XT case modification to fit AIOs over 60mm tall. Made to fit the Phanteks Glacier One 240 30T AIO
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 216
- Makes
- 2
- Views
- 2,670
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
Phanteks Evolv Shift XT case modification to fit AIOs over *60mm tall. Made to fit the Phanteks Glacier One 240 30T AIO. But will work with other AIOs as well. The mod was designed to blend in with case.
*Will fit up to 70mm tall incurrent state.
- Filament used: PETG (Prusament)
- Standard PETG configuration used in Prusa Slicer. Added support only to middle of Rear Extension part ( Nozzle : 240°C / Bed: 80°C 1st layer - 250°C/90°C After 1st layer)
- Need four #6-32 / 3/8" Pan head, Phillips screws.
- Top-Front plastic guide rails need to be removed to fit Locking screw pegs extension.
- Do not over tighten any screws. Screw down until secured snug.
Feel free to remix this to your liking!!