1 / 2
UV curing light 45 degree bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I built myself a cheap UV curing station for resin prints out of a beer box, aluminum foil, and a UV light off Ebay
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 39
- Makes
- 0
- Views
- 272
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I built myself a cheap UV curing station for resin prints out of a beer box, aluminum foil, and a UV light off Ebay. Bolts to a cardboard box using 12mm long M3 bolts. The UV lamp has 4 bolts already installed holding a piece of edging in place. I removed that edging strip and used the existing screws to bolt the lamp onto the bracket.
https://www.ebay.com/itm/265411745095?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649