705 models
This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…
Der Ultimative Filament Clip: Snap & Secure Dein Filament! Bist du es leid, dass sich dein Filament auf der Spule löst, verheddert oder unordentlich wird? Unser Snap & Secure Filament Clip ist die perfekte Lösung für jeden…
Utility Carabiner: Secure and Versatile Clip for Everyday Use Product Description: The utility carabiner is a versatile and reliable accessory designed for everyday use. Featuring a pre-tensioned mechanism, it stays securely closed…
The air tag secure holder is compatible with the key ring. Tested in PLA and ABS, works properly! 0.2 layer, support not needed. Ask for any questions. Check my other models: https://www.printables.com/model/1149589-air-tag-secure-holder…
STABLE AND SECURE: Improves adhesion and stability on any surface, prevents canister from wobbling or tipping over. The stand fits for 90mm and 110 mm gas canisters, so you can use it with any camping stove. There are two versions to…
This remix of the original chain link bracelet is slimmer and thinner, yet still provides enough space to showcase eg. the carbon pattern. The smoother design reduces skin friction for more comfortable wear. It offers a stronger assembly…
Stop the original metal hooks from falling down and ratling around. Use the 3D printed hooks for even more securely fastened hooks as well as to spice up the colors on your Skadis board. The included tool allows for quick and easy removal…
TLDR: Use this clip system to very securely attach elements to your Skådis / Uppspel pegboard. This design securely prevents lifting as well as downward and lateral forces and can be paired together for larger heavier objects. Design…
I printed this in Red ABS for gifts to my senior friends who are always dropping their picks. Ha. It will stand on the bedplate on its back end and print well. I then hung it in a jar for a while with Acetone until shiny and smooth. It…
If you need to paint or finish a part, paint cones are a must. They hold your part above the surface. They allow you to hold a wet part without marking it. They can hold spherical parts in place and stabilize complicated shaped ones.…
Easily printable without support and attaches to a European style tow bar with a ball of 50mm. Color can be printed by manually changing filament while pausing print at specific height or in a Tool Changer, MMU or other multi material…
When I am running, sometimes my AirPods Pro are falling, so I have designed this ear holder. I have added 7 different sizes. Print it with support (for the arm) in some flex materials like TPU. You can print in PLA or PETG but it is less…
Use case This design was originally done to fix my company ID cart to my trousers at work. I needed to be sure that I do not loose this card, so I decided to come up with an own design that is securely lockable. Feel free to use it for…
Hello everyone, I’ve designed a handy child safety lock for caravan windows and wanted to share it with you. This lock is specifically designed to prevent children from opening the windows on the bunk bed, ensuring extra peace of mind…
If your extruder keeps stopping mid print and seems to magically start again after docked, most likely the cable is coming loose. Over time, the cable connector will slowly back out of the dwarf-cover-base and put strain on the white plug…
So, this isn't exactly some super innovative concept BUT if you are one of those people who aren't exactly fans of tying shoelaces, have a 3D printer (or access to one), and have some TPU filament...This thing is for you! My major focus…
Eppendorf Tube Rack with Spring Mechanism Available sizes 2x16, 4x16, 6x16, 8x16 3x8, 4x8 3x6 Description Tube rack designed to hold your Eppis tightly with springs. I find this useful for storage of large collections of tubes, to avoid…
This is a printable adapter for your shopvac hose that you can add to a project No supports required Can be scaled up or down as needed - designed to connect to my dewalt shopvac here is a video of it in action
Thank you Marko Borsic for the original design and Boris Cvjetkovic for the remix with the clip. It worked great for me but sometimes the 6mm Bowden tube could pull out with little pressure when slightly moving my polymaker filament box.…
A carabiner with a spring loaded locking mechanism. My first 2 versions of a locking carabiner was with a screw, but it took too long to open and close. As these plastic carabiners are not ment to handle large loads like of a person, the…
A friend asked for a hot wheel dual track with 8 mm spacing for Monster Trucks. Inspired by https://www.thingiverse.com/thing:1797697 (thanks!) Added a latching mechanism (with a single button) Added rails on the top side to minimize…
En forme d'athlète haltérophile, ce distributeur de cure-dents amusant et hygiénique est pratique, son allure amusante fait toujours sourire. Ce distributeur sera un bon complément à la table à manger. Le mignon petit homme à l'intérieur…
This is a problem that has plagued me for over 20 years. I was so pleased to see several 3D printed solutions. Unfortunately the original design by guss67 typically requires supports. To combat this there are designs that print in the…
A very secure bag clip to close any opened bags. The hinge is designed with low tolerances to ensure a secure fit, and prevent any loose feeling parts. Clip surface is recessed for enhanced grip. The two notch design makes sure that the…
The wife wanted this to help her when she paints her finger nails. You can adjust the height to suit by scaling it in the vertical axis in your slicer. Category: Accessories
Lockable Milwaukee M12 Battery Holder – For Upside-Down Mounting & Shaky Environments Keep your Milwaukee M12 batteries secure, even in harsh or mobile environments, with this lockable battery holder designed for professional use in work…
A flat holder for 6 SD cards. Each card is held in place by a flexture latch that still permits easy insertion and removal. Cards can be inserted in any orientation and still remain secure. The flexture also holds micro SD cards in their…
Secure-Snap Cardboard Spool Ring for QIDI Box - various diameters 3mf is the QIDI Studio Project for ASA (smooth plate) The Problem If you use cardboard spools in the new QIDI Box, you know the struggle: most adapter rings rely on a…
This is a remixed wall mount for air tools. The original (https://www.thingiverse.com/thing:5071780) was great but some of my thicker tools wanted to jump out when I walked by them. The slot is now slanted with a bump at the end so they…
Sport add-on to the AirPods 4s, I will be coming out with more generations soon(mostly the newer ones). Place the AirPods in, mayweed to clean the inside of the hole, it works, if all else fails, with proper precautions, grab a lighter,…
#1 of Gamerant's “10 Free 3D-Printed Steam Deck Accessories to Check Out” https://gamerant.com/best-free-3d-printed-steam-deck-accessories/#secure-microsd-card-holder-6-slots A quick and easy to print microSD card holder for the Steam…
Presenting the Wyze Doorbell V2 Cover – a minimalistic yet secure solution for enhancing your doorbell's functionality. This 3D-printable cover seamlessly integrates with the original mounting hardware, ensuring a snug fit while…
Print it, turn and see what happens. Simple planetary gear that is obscured when turning. If turning in one direction it will at some point go back to normal but it takes a lot of turns. Not sure how many (18 thanks to ChrisHitchabout…
I designed this holder so that my 3/8" Impact gun can stay secured while I travel up and down the roads and move my Pit Kart around the pits. He has a nice snug fit and enough side height to keep it stationary on bumpy roads. Hope it…
Wahsing in Ikea food container (with magnetic rotor plate at the bottom) Drying/Curing by attaching quick mounting fan / UV LED arms. Printed using Prusa Mini+ (all parts fits). 0.2mm, no supports, use brim for large box parts, PLA All…
I wanted a part for my Wash and Curing station from Anycubic. I dont like the original Cage for the Washing part, so i build a new one. Build with your slicer, but without Top and Botton Part, Select Gyroid Infill for good stiring. 10%…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) This is a simple holder for the detachable turntable for an Anycubic W&C 2.0 . It may fit other plates with 140mm diameter and 4mm thickness…
It is not uncommon for resin components to fall over during post-hardening. My rotary table can help. It is equipped with holes for M3 threaded inserts to attach holders to the table. so everything stays where it should be
A mount for a Garmin Varia radar to a saddle bag. I added a slot under the Garmin mount plate for a wire tie around the whole thing to make it extra secure. The downside is that you need longer screws than the ones that come with the…
Easily attaches to the Bambu Lab PS1,P1P & X1 3D printers and provides a compact waste or ‘poop’ collection solution. Strong magnets used are: Q-25-06-02-SN Block magnet 25 x 6 x 2 mm, heat-resistant, holds approx. 1,7 kg from…
A completely new design Air Tag secure holder compatible with a key ring. Tested in PLA and ABS, works properly! 0.2 layer, support not needed. If you have any questions or doubts, please contact me! Please leave 5 stars if you like it…
No support, PETG Print as many as you need to organize garden hoses. Screw the Secure Hose Holder MAIN to the wall, place the Cover on top, and press until you feel resistance from the hose. Designed to connect together for a vertical…
The Sparco gear knob is a popular low cost shifter for your Thrustmaster TH8A shifter, but the fitment leaves alot to be desired. This adapter securely mates the TH8A thread to the internal diameter of the Sparco knob with zero flex .…
In this remix of the Ender 3 Sprite Extruder hot end fan replacement with a 5015 blower , I made several modifications, added M2.5 nuts for the extruder backplate, and M3 nuts for the fan bracket. I made a small modification to the…
This AirTag case is designed for secure attachment with a reinforced hole, allowing you to hook it onto any item with ease. The internal fit ensures your AirTag stays in place, while the grooved pattern provides an enhanced grip. The case…
Holds your controllers reliably and securely. Can print the all-in-one “One Piece” model or print the mount and HSW insert parts separately (and glue them together). It doesn't look pretty, but good luck knocking a controller off…
This syringe holder provides a secure and compact solution for transporting pre-filled insulin or other 1 ml disposable syringes, preventing accidental plunger movement or damage. The updated design now supports multiple syringe types ,…
The clips will push into the aluminum work surface used on the Snapmaker machine when set up for work with laser. One side pushes against thick work, the other will hold down paper or cardboard. I found the rubber pieces that Snapmaker…
Holds a hammer, remixed from citizen458931's hammer mount but adds some extra supports and a front lip to ensure the hammer doesn't fall. My hammer is pretty high up and near my printer, so wanted to make sure this was extra safe. Uses…
Do you want to tow a cool model behind your car instead of that old protective cap you keep loosing? Then this is for you! The final model will stay in place however bumpy you drive, even a folkrace. It will shatter before falling off, so…
Due to loosing my original replacement platform I took some pictures, fired up illustrator and did my best to design a part that fits on the screw that rotates just as nice as the original. I have uploaded 2 versions, 1 can easily be…
🚗 Practical Design: Our unbranded 3D printed cup holder divider is specifically designed for Volkswagen MK 6 / Golf 6 models. Crafted with precision and simplicity in mind, it seamlessly fits into your car console to keep your drinks…
Orignal Model with lots of size options. https://www.printables.com/model/1218292-mini-pocket-slide-box-5cm-7cm-9cm-h15cm I made this for pill holding for a family member with the size in mind to slip in jeans watch pocket and to make it…
🔥 BIC Secure‑Grip Lighter Sleeve 🔥 A print‑ready sleeve optimized for any 3D printer—no supports, minimal filament use, and gentle overhangs. Its compliant walls adapt to slight size variances across Bic Classic, Bic Classic Push, Bic EZ…
A hook to secure the Thule Omnistor storm strap set. It prevents the storm hook from slipping out of the locking point.
Anycubic Wash & Cure Plus impeller replacement. The imepller in the Anycubic wash & cure Plus station keeps rusting due to the metal ball bearing at the center. Once that happens, then rust particles begin to stick to the magnets that…
Added notches to the pins and cogs to make the cogs turn more securely. I also made the handle thicker. This often was the cause of failure on my print. Added a spacer on the handle to make the turning smoother. Made the ledge on which…
THIS IS NOT A JOKE! I strongly suggest you guys open up the back panel to check your Qidi Q2 machine first when you have recieved it. There is an assembling faulty which could happen on your Q2! By default, the toolhead cable in the back…
Polestar 4 Charging Cradle Retaining Lip – Keep Your Phone Secure! 📱🚗 Does your mobile phone slide out of the charging cradle in your Polestar 4 whenever you accelerate a bit too enthusiastically? You’re not alone! This retaining lip…
Drehtellerhalter für Anycubic Wash and Cure Plus
LowRider v4 CNC - Tie Downs to secure 24v Power Supply (AC-DC) to lower strut plate of gantry. This is the 24v power supply I purchased from Ryan at v1e.com … Print as oriented. No supported needed. I pre-drilled and used M3 screws, but…
Two drawer container designed to deal with mess related to nail glitter application. It allows to recycle unused glitter. Wife's happy ;) Print without support as shown below. If you have problem with lifting corners add brim. If you…
I like to think of filament pulling as effortless. But when it is easy, the filament tends to slip off the spool and risks getting stuck on the central axis. That's why I adapted the two-roller system to the Prusa Core One's side…
Elegoo MercuryX Wash&Cure station is a nice device for resin printing. Unfortunately, Elegoo does not sell replacement washing tanks and it is too small for large format printers. This model allows you to turn a common Ikea 365 container…
This is a replacement basket / strainer for the Anycubic Wash & Cure Plus station. Make sure to print using a chemically resistant material because the IPA will degrade the plastic otherwise.
An ultralight Everyday Carry (EDC) utility attachment designed to slide directly onto your backpack's shoulder straps, providing a dedicated, secure anchoring point for carabiners, keys, water bottles, or pouch clips. The design features…
The main wallet body can be printed in your preferred material e.g. PLA but ASA or PETG is recommended. The side springs and money retention springs should be printed sideways and in a flexible material (ASA works best). The other parts…
This is a modification of the OEM Creality CR-10s Pro fan duct. The original fan duct has a crazy thin tab where it attaches to the fan, and it breaks very easily. I thickened that. It also has a slant to the bottom which makes for…
Objective Tokens for Marvel Crisis Protocol Secure/Extract 25mm diameter 3mm height Change filament at 2,20mm
This AirTag mount was designed with security in mind to withstand attempts of removal. Combined with screw locks you will have a ridgid, light and secure tracking solution for your beloved bike. UPDATE: added cover designed for ruthex m2…
Just a small container to clip to your backpack. Securely fits some smokeware and a specific type of lighter. Threads have some tolerances - should be easy to print
I own a SUNLU Filament Dryer S4 and while it's great it has a known flaw. When a spool gets light or is half-empty it tends to jump off the original track and block itself. This risks failing the print and is just generally frustrating. I…
After dual-Z upgrade for my Ender-3 (non-pro), I wanted to move the PSU. Tried few existing designs, but all had some downfalls, so remixed this to make is secure. https://www.thingiverse.com/thing:3304804 - This slides into extrusions…
I liked the idea of original Pegboard Glove Clip model, but the peg on it was too thick and required some cutting to make it fit. It also pivots and pulls away from the pegboard when you pull the clip out to slide your gloves in. This…
Needed something to hold the tools from a cheap manicure set as you can’t put them back into the box.
Got tired of the filament rolls falling off the holder on my Ender 3 v2. Made this filament holder to fix that problem. Fitted two 608zz-bearings inside to make it turn really smooth. Depending on how tight you fasten the front holding…
Securely holding the bearing @@ omgwowbbq
I wanted a very sturdy shelf and dimension'd it around my binos. I made some design choices around the printability such as the slope in the front retaining wall not requiring any supports. This model printed best with a 0.6 print head in…
This can be used to mount the standard stepper motor drivers on standard DIN Rail. I fixed the issue of having to tap holes in similar DIN rail mounts by adding space to embed hex nuts. Works for the following STEPPERONLINE Models: DM542…
designed to hold a turntable plate for Anycubic wash and cure. Can stay in place
A beefy control horn (mainly for flying wings) that needs no Loctite to keep the linkage stopper in place. I needed a horn that would stop the little nuts from eventually flying off, and even though I use Loctite, sometimes the nut would…
Designed to prevent the extruder cables from sagging and running into large prints. Printed/installed on an MK3S+ @ 0.2 QUALITY with PETG. I recommend printing it vertically with a brim. Requires (2) M3x8 screws for mounting. (M3x10…
A simple strainer designed to fit in a "decor 3.0L" square container. The side handles print separately and need to be attached with something like glue or plastic welding. The top of the side handles have a 2.8mm hole in them for…
I have the idea aof some different tools to hold a model in the UV-Light of the anycubic wash&cure device. The rotating plate is often frustrating and therefor i wil create some different hangers and fixing tools for the models. All you…
this is for the anycubic wash and cure version 3
Allow me to present my innovatively crafted pill organiser. This meticulously designed box features seven spacious compartments, seamlessly aligning with each day of the week through the use of discreet yet robust magnets. The secure…
notes on printing Parts with 2x need to be printed twice, and those with 3x need to be printed three times Parts with "L" in their name indcate that they are only for the left side and need to be flipped in the slicer for the other side…
This is a modified design to the https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc2 that allows the user to use anything from rope (up to 0.25" diameter) to elastic bands (up to 1 inch) to cloth/nylon webbing (up…
FEATURES Keep precious cargo from sliding and tumbling around in your trunk or car floor. Great for transporting cakes, pizzas, and other important packages. TIP: Use a color that stands out so they don't get lost in the depths of your…
A variation of LostTraveler's bucket bottom sifter for the Anycubic Wash/Cure Plus. Designed to fit into the wire basket or into the bottom of the bucket with included extenders. Printed in PETG with layer height at 0.2mm. The models are…
This Bowden tube clip gets rid of the loose fit the original clip has at the extruder. My Ender 3 v2 had a lot of play at the fitting so I found a model that is designed to fix it. It worked very well but I had a lot of issues printing it…
If like me you are tired of using cable holders that do not allow to use ticker fast charging cables or that your cable is always falling of the slot, this is the solution for you. To start, I may do smaller sizes, you have 5 slots with a…
Convert any M3 screw to a thumb screw with this print. A M3 nut is used to secure the screw in place. There is also a slot to screw it with a coin, etc.
Quick remix i made to make the mount a little more secure. i didn't like how the front flexed, especially since i was using a heavier insta360 camera. THIS ALSO MAKES IS MUCH MORE DIFFICULT TO GET OFF so i wouldn't plan on taking it on…
I made these years ago inspired by other wrench organizers that I saw, but I wanted to be able to carry the wrenches without concern for them falling out or the retention strap coming loose. Added extended clips to accommodate wrenches 8…
Keep your SIM and Micro SD cards secure and organized with this premium protective case. Designed with durability and portability in mind, this compact case features a textured screw cap for a secure grip and an easy-to-open mechanism.…
This 3D print helps position the magnetic charger for solid contact and worry-free charging of the Sensecap T1000-E in any orientation. Most charging sleds I found rely on the built-in magnets to keep the device seated, which didn’t…
under construction. More is coming soon If you want to replace your agitator, you have to use a material which is resistant to IPA or water. For IPA I recommand using PP or PA. If you take a bit more care about it, you can also use PETG.…
Tired of towels constantly slipping off your bathroom radiator? This easy-to-print, snap-on towel hanger is the perfect solution! Designed to fit radiators with 20mm pipes and 20mm spacing , this hanger ensures your towels stay neatly in…
Needed to use the 30 degree wedge for my installation, but wanted to also use the security cover design. I remixed the bottom mounting frame with so that it mounts 30 degrees offset. I use 3mm heat inserts for the two small holes on the…
