1 / 4
Secured Extruder Cable Clip for Prusa MK3S/+ Frame
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extruder cable clip for MK3S to prevent extruder cable from hitting large prints and sagging. Requires (2) M3x8 screws.
- Rating
- 4.833 / 5
- Likes
- 24
- Downloads
- 166
- Makes
- 6
- Views
- 692
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Designed to prevent the extruder cables from sagging and running into large prints.
Printed/installed on an MK3S+ @ 0.2 QUALITY with PETG.
I recommend printing it vertically with a brim.
Requires (2) M3x8 screws for mounting.
(M3x10 screws may work but might stick out a bit. The “arms” are 3mm thick and the Prusa frame is roughly 6.2mm thick.)