Haldis Ender 5+ direct drive extruder mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to allow a Haldis extruder to be used in a direct drive configuration on the Ender 5+
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 47
- Makes
- 1
- Views
- 598
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I purchased a Haldis extruder as an upgrade to the stock Ender extruder. The only down side is the Haldis isn't a direct swap for the stock extruder. I wanted to use the Haldis extruder in a direct drive upgrade but couldn't locate a printable mount for it. I designed this mount with the extruder/motor turned 90° to the printhead to allow for access to the tension adjustment bolt and offset it to align the outlet of the extruder with the printhead inlet.
The mount is designed for a press fit over the stock upper guide wheels, on the printhead mount.
I also made the mount slightly thicker in this version to stop some flexing I saw on the first design, not published. May require longer mount bolts.
Recommend printing as oriented, with supports to outside of mount. This allows for a much easier cleanup and better mounting of the extruder.